MKD112B-048-GG2-BN
MKD112B-048-GG2-BN工作中，不仅应保持工作的质量及效率，还应具备创新精神。西大农药厂，即将面临“改制”的调整，这就意味着该企业将面临由“校办”企业向“社会”企业的角色转换，先前所享有的一些优惠政策，将随着改制的完成而倾刻丧夫，这样，农药厂将更直接的面临市场激烈竞争
接受残酷的规则约束，为了企业的生存、发展，就得创新，以变求生存，用新促发展，西大农药厂在面临新一轮发展的时期，应鼓励员工大胆创新，为企业的发展积极献计献策。[2]
实是每一个大学毕业生必须拥有的一段经历，它使我们在实践中了解社会、在实践中巩固知识；实又是对每一位大学毕业生*知识的一种检验，它让我们学到了很多在课堂上根本就学不到的知识,既开阔了视野，又增长了见识，为我们以后进一步走向社会打下坚实
的基础，也是我们走向工作岗位的*步。刚开始对于从未接触的岗位，我感到是那么的陌生和惧怕，因为我不想做不好，但是我
相信只要有信心，就一定能做好。 我被分到自动化事业部研究所工作，*开始跟着师傅学组态王软件的开发及其应用，
发现真正步入一个企业接触到的知识要比学校里深入的多了，所以很多地方需要向师傅请教，
经过师傅的耐心培养，每天看软件开发的视频教程，自己可以对组态王软件进行简单的编程。
根据师傅给我安排的实计划，有了亲自去现场观察实践的机会。 这四个月不仅仅是去工作，更重要的是学到了一种工作方法，一种应对不同问题的经验，
一种面临难题的解决思路，当然也注意到了一些自身的问题，意志不够坚定，中途有退出的
想法，遇到问题有畏难情绪，但我*终还是坚持下来了，的来说实还是收获不少。 我很感谢实单位给我们实培养计划安排，让我学到了一些在学校所学不到的东西.
让我学会了如何与人相处，学会了面对困难,学会了独立思考问题，从中收获了毅力，收获了
81001-450-53-r when writing this field, timer 4 loads the written value on the next rise, the edge of the timer clock, whether the timer is enabled or disabled. The value stored in this register will also be automatically reloaded (or timed out) when the terminal counts. When reading any field, the current count value is locked and returned. There are two modes that determine how to lock the count, depending on the "read latch select" bit in the WDT control status register (csr2). See csr2 for more information about these two modes, see the registration instructions. When reading this field, the current count value is locked and returned. There are two modes that determine how to lock the count, depending on the "read latch select" bit in the WDT control status register (csr2). See csr2 for more information about these two modes, see the registration instructions. Timer 4 current count register (tmrccr4) the current count of timer 4 can be read through timer 4 current count register (tmrccr4), located at address offset 0x28 in bar2 81001-450-53-r A-B high voltage converter module
1. Central processing unit (CPU)
Central processing unit (CPU) is the control center of PLC. It receives and
Store the user program and data input from the programmer, check the status of power supply, memory, VO and alarm timer,
And it can diagnose the syntax errors in the user program: when the PLC is put into operation, it first receives the on-site inputs in the form of scanning
Enter the status and data of the device, store them in the IO image area respectively, and then read the user program one by one from the user program memory
Sequence, after command interpretation, send the result of logical or arithmetic operation into VO image area or data storage according to the provisions of the instruction
Inside. After all user programs are executed, the output status or output register of the 1/o image area is finally stored
The data of is transmitted to the corresponding output device, and the cycle runs until it stops running.
In order to further improve the reliability of PLC, in recent years, double CPUs have been used to form a redundant system for large PLC, or
