精技灵巧力学测试系统 ACCUTEK PROAGILITY Accutek ProAgility 精技灵巧力学试验机系列可为骨科植入物测试提供一种的解决方案。 ProAgility 精技灵巧系列具备如下特征： �6�1 使用机电电源；无需气压或液压动力 �6�1 为典型 ASTM 试验预编了程序 �6�1试验机能 轻松适应不同的试样尺寸和自我设计的测试 �6�1 小输入需求的合理化用户界面 �6�1 极小的空间需求；有限的外部噪声 (已申请 Patent Pending） ProAgility 精技灵巧 轴向脊椎测试框架系统 典型试验： ASTM F382, F1717 1000 N 动态拉-压 0-30 Hz 动态试验运行频率 25mm 峰-峰值位移 120V 单相电源 （可改装为适合的电源） 4 套试验框架，附加数据采集系统 ProAgility 精技灵巧轴向髋置换/椎间固定/锥体置换 试验框架系统 典型试验包括： ASTM F1044, F1440, F1147, F1612, F1800, F2077, ISO 7206 10,000 N 动态拉-压 0-30 Hz 动态试验运行频率 3mm 峰-峰值位移 120V 单相电源（可改装为适合的电源） 4 套测试框架，附加数据采集系统 ProAgility 精技灵巧 MC4 轴向-扭转测试系统 典型试验包括： ASTM F382, F543, F1717, F1798, F2706 轴向规格： 静态 +/- 5000 N 静态拉-压 0-150mm 轴向行程 动态 +/- 3000 N 动态拉-压 0-30 Hz 动态试验运行频率 扭转规格： 静态 +/- 100 N-m 静态扭转 扭转行程无限制 动态 +/- 10 N-m 动态扭转 0-30 Hz 动态试验运行频率 220V 3Φ 单电源 单测试框架，附加数据采集系统 9799 D Princeton-Glendale Road | Cincinnati, OH 45246 | Phone: 513.984.4112 | E-mail: info@accutektesting.com www.accutektesting.com
Accutek, a leader in the
field of medical implant testing, offers you an unparalleled solution for
in-house testing of your spinal implants with the AccuSpine MC4, a 4-in-1 electromechanical
test
You can perform static
tension/compression, static torsion, axial (tension/compression) fatigue &
torsional fatigue testing with a single test
While spending for outsourced mechanical testing varies, complete ROI of the AccuSpine MC4 spinal implant testing system is typically achieved within six to eighteen months.
With the AccuSpine MC4 Spinal Implant Testing System, you will:
· Perform feasibility testing on demand
· Combine the functionality of four test machines for the price of one
· Get your spinal implants to market faster by shortening the product development lifecycle
· Gain versatility in your testing programs
· Install sooner; Start testing faster
· Low long-term cost of ownership with minimal servicing and off-the-shelf replacement components
Download product brochures
With the AccuSpine MC4, you can run a variety of ASTM tests for spinal implants, such as screws, rods, plates, intervertebral devices, bone plates and more. Standard tests include: ASTM F382, F543, F1717, F1798, F2077 and F2706.
· Electromechanical
Configuration
The MC4 runs on an electomechanical power supply - no air or
hydraulic power supplies are required. Since you forgo the use hydraulic fluid
and equipment, you avoid messy spills and clean-up. Plus, electromechanical
systems are much quieter.
· Prewritten programs for
typical ASTM test
Minimize set-up time by using Accutek’s pre-written programs for a
variety of ASTM specifications, such at ASTM F1717. The streamlined user
interface requires minimal input.
· Minimal space required, plus
quiet operation.
For many companies, space is valuable and often shared with others
in the organization. The MC4 footprint is less than 4.5 square feet and quiet
enough for any office or laboratory.
· Easily adaptable for various
specimen sizes and custom tests
Don’t let your equipment dictate your testing protocol. You can
customize and modify the MC4 to perform the tests on the devices you need.
Components are easily changed by your test engineer as needed.
· Financing options available
Accutek offers options for financing the AccuSpine MC4 at a low
monthly rate for terms between 36 and 60 months.
