1、滑触线的表面的外壳会经常有裂开，主要还是因为其导体的变形所导致的，处理这样的情况我们可以增加提挂架的办法来解决。
1, sliding contact line on the surface of the shell will often have cracks, mainly because of its deformation caused by the conductor, to cope with this situation we can add up to the ways to solve.
2、我们在使用该产品的时候会出现火花，主要还是因为其表面和导体之间的接触不良的原因导致的，我们可以检查导体接头保证两者之间的接触面必须达到百分之七十。www.tiangaodq.com
2, we will appear when using this product, mainly because of its surface and the cause of the poor contact between conductors, we can check the conductor joint guarantee the contact area between the two must be up to seventy percent.
3、要是出现断电的情况可能就是因为电刷的磨损很大而且也不能与导致所接触或者是直接松脱，处理这样的情况我们可以先检查其磨损情况，看看是否要更换新的，然后在检查连接点。
3, if appear the situation of the power may be because the brush wear is large and can't directly with cause the contact or is loose, to cope with this situation we can check the wear condition, and see whether or not to replace, and then in the check points.
4、当电流过大的时候电器设备的行走就会变得有问题，处理这样情况我们可以采用增加电器数量，调整连接导轨就可以了。
4, when the current is too large electrical equipment of walking becomes a problem, to cope with this situation we can use to increase the number of electrical appliances, adjust the connection guide.
