BNI PBS-302-000-Z00 balluff 模块技术参数我司销售德国巴鲁夫，巴鲁夫模块，巴鲁夫接近开关，BALLUFF限位开关，巴鲁夫光电开关，巴鲁夫位移传感器，巴鲁夫厂家直销
Profibus module
订货代码 : BNI000A
BNI PBS-302-000-Z001
| Interface | Profibus |
| Number of inputs | 16 |
| Configurable inputs/outputs | Yes |
| Number of plug-in positions | 8 |
| Number of outputs 2A | 16 |
| Enclosure Type per IEC 60529 | IP67 (when connected) |
| Approvals | CE CSA UL94 |
| Mounting instruction | See short guide |
| Scope of delivery | |
| Switching function indicator | Yes LED yellow |
| Transmission protocol | PROFIBUS DP per EN 50170 |
| Actuator supply UA indicator | Yes LED green |
| Sensor supply US indicator | Yes LED green |
| Rated operating voltage Ue DC | 24 V |
| Switching output | PNP |
| Address range | 0-99 |
| Number of inputs | 16 |
| Number of outputs 2A | 16 |
| Bus system | PROFIBUS |
| Configurable inputs/outputs | Yes |
| Current sum UA (actuator) | 9 A |
| Current sum US (Sensor) | 9 A |
| Data rate max. | 12 Mbit/s |
| Data rate min. | 9.6 kBit/s |
| Inputs | PNP Type 2 |
| Operating voltage | 18...302 V DC |
| Oberflächenschutz | Cu 15 µ / Ni 15 µ |
| Vibration rating | 5-61 Hz const. amplitude 1 mm 61-500 Hz const. accel. 15 gn |
| Ambient temperature Ta max. | 70 °C |
| Ambient temperature Ta min. | -5 °C |
| Sealing ring material | FKM 75 (Viton) |
| Housing material | GD-ZnAl4Cu1 (die-cast zinc) |
| Length | 224 mm |
| Mounting type | 2-hole screw mounting |
| Contact surface protection | 2 µm Ni / 0.4 µm AU |
| Number of plug-in positions | 8 |
| Design | Two-row |
| Housing shield | Yes |
| Casting compound | UL V-0 |
| Storage temperature max. | 75 °C |
| Storage temperature min. | -25 °C |
| Connection Bus In | 5-pin male M12x1 |
| Connection Power In | 5-pin male 7/8" |
| Connection Power Out | 5-pin female 7/8" |
| Connection sensors/actuators | M12x1 |
| Ground strap mounting | M4 |
