Sherwein Babbco着色渗透探伤剂套装：
渗透剂：DP-55（500ml）
显像剂：D-100（500ml）
清洗剂：DR-60, N-120（300ml）
深圳华清仪器仪表有限公司销售；来电洽谈：
RED DYE PENETRANT DP-55
Type II Method A (water-washable) and Method C (solvent removable) level 2 red
dye penetrant, as per AMS 2644 and ISO 3452-2 standard, used in the “normal range
of temperature (+10°C to +50°C)” as defined in ISO 3452.
Rhodamine-free and Azo III A2 amine (diazo) free.
Companion products : Cleaner : N120, N106A, DR-60, DR-62.
Wet developer : D-100, R60, D-106
深圳华清仪器仪表有限公司销售；来电洽谈：
Sherwein Babbco 磁悬液，荧光磁悬液，黑磁粉，磁膏 sherwin
B-101C Fluorescent Magnetic Developer
Features:
B101 C benefits of a very interesting grain size range: from 0.5 to more than 10 ?m.
Therefore it is a very versatile product which is suitable for detection of "normal" or
very thin defects. Its carrier liquid makes possible a very high freedom of movement
of particles. This enables a flawless detection even in case of critical inspection conditions.
Packing:
? Aerosol 400 mL. non-flammable.
Aerosols propelled with compressed gas 400 ml
KP-17B Fluorescent Magnetic Developer
Features:
KP-17 B is a general-purpose product for magnetic testing. Its average grain
size range is centered on 8 ?m, starts from 1 ?m and ends on 10 ?m. Low
background, Petroleum with a flash point 60 °C : the product is more intended
for small benches or as non recyclable sprayed product.
Packing:
? Barrel of 10 liters.
KP-25 Fluorescent Magnetic Developer
Features:
Used in Aeronautic industry.
Ultra-thin grain size.
Particles easily put in suspension.
The KP-25 is approved by DASSAULT, SNECMA,
AEROSPATIALE, ROLLS ROYCE, TURBOMECA.
Its ultra-thin grain size makes it a very thorough detection product
(Poudre from 3 to 11 ?m with average at 6.5?m).
It is ideal for machined surfaces. Its petroleum medium is improved for a
high contrast and few violet reflections, thereby offering astounding
observation conditions. Slow sedimentation, with the possibility to put the
particles back in suspension very quickly, practically no risk of accidental
powder deposits in the tanks.
Try it !
Packing :
? Barrels of 10 liters and 25 liters.
深圳华清仪器仪表有限公司销售；来电洽谈：
KP-118 Fluorescent Magnetic Developer
Features :
KP-118 benefits from an extremely shiny powder that provides very clear indications
and very low background , even on coarse surfaces. With an average grain size
powder, KP 118 is a very versatile developer. Flash point 100° C.
Packing :
? Barrels of 10 liters and 25 liters.
WCF-17B Fluorescent Magnetic Developer
Features :
200 ml concentrate doses for 10 L of water.
WCF concentrate contains :
The anti-corrosion, the wetting agent, the anti-foaming agent, the powder.
Using these doses, provides a very effective ink at low cost.
Use on worksite with a spray, or a bench.
Precautions: degrease the parts thoronghly, sensitive to frost.
Packing :
? Box of 6 doses (1 dose for one barrel of 10 liters of water)
? Barrel of 5 liters.
Babb Co Safe 778A Fluorescent
Features:
Yellow-Green fluorescent magnetic ink for inspection under UV-A:
- very thin
- very stable
- 250mL concentrates to be diluted in 10L of water
Can be used with any magnetic field generator (current passing,
hand yokes, permanent magnets) and in magnetic benches.
Packing :
? Box of 6 x 250ml
? Barrels of 1 and 5 liters
KP-600 dual use Developer
Features :
Dual use red petroleum
KP-600 is a red magnetic developer under white light and fluorescent /
orange under ultraviolet light. It is dosed in powder for use under white light.
On certain dark-colored parts, its color makes it possible to skip applying
white background. For more thorough detection, one can work under
white light that is "boosted" with some ultraviolet (e.g. sunlight) or under UV
radiation. The background in that case is significant because KP-600
has a very high powder content. Flash point 100° C.
Packing :
? Barrels of 1, 5 and 10 liters
MG-118 Fluorescent Magnetic Powder
Features:
Excellent brightness, little noise, for every part, excellent results on rough areas.
After several uses, upgrade the powder level as in KP-118.
Packing:
? Box 500 g.
? Box of 1kg.
MG-600 dual use red Powder
Features:
Versatile: after several uses, upgrade the powder level as in KP-600
Packing:
? Box 500 g.
? Box of 1kg.
MG-800 Fluorescent Magnetic Powder
Features:
Versatile: after several uses, upgrade the powder level as in KP-17B.
Packing:
? Box 500 g.
? Box of 1kg.
MG-810 Fluorescent Magnetic Powder
Features:
Composite powder composed of: MG-800 powder (see KP-17B & B-101C features), wetting and
anti-corrosion agents. Unlimited life cycle! A new way to deal with economical water-
developers. Powder to be diluted at 10 g/L.
Packing:
? Box 500 g.
? Box of 1kg.
LY-2500 Fluorescent Magnetic Powder
Features:
Ultra thin, predilection on manufactured surfaces, high power hooking up of the magnetic field
leaks lines.
After several uses, upgrade the powder level as in KP-25.
Packing:
? Box 500 g.
? Box of 1kg.
SY-8000 Fluorescent Magnetic Powder:
Features:
Versatile, high performance: SNCF approved.
Packing :
? Box 500 g.
? Box of 1kg.
BP-42 Black Magnetic Powder
Features:
Black very sharp, very stable, after several uses, upgrade the powder level as in KP-42.
Packing:
? Box of 1kg.
深圳华清仪器仪表有限公司销售；来电洽谈：
B-103C Black Magnetic Developer:
Features:
Product relatively well loaded with powder for an ideal balance of the contrast.
The liquid that carries it allows for high particle mobility for seamless detection,
even under critical operating conditions.
Packing:
? Aerosol 500 mL.
B-102A White background PELLICAL:
Features:
White strippable lacquer, easy to remove by pulling and brushing, quick drying
and great coverage, serving as a contrast agent for black or red magnetic developer.
B102-A offers a considerable time saving during all operation that requires the
elimination of magnetic white background after the inspection.
Packing:
? Aerosol 500 mL.
? Barrel of 10 L.
B-104A White Background
Features:
Product heavily loaded and opacifying. Length treated: exceeding 30 meters with
a spraycan. High covering effect with a very thin
surface / aerosol ratio, after drying, the
Fast spraying in order not to waste any time,
nearly no clogging.
Packing:
? Aerosol 500 mL.
B-105 Solvent:
Features:
B-104A being very durable, cleaning it requires B-105!
B-105 can also serve as a general-purpose degreasing agent before
penetrant testing, for example.
Hyper effective to remove the B-104A (and white backgrounds in general...)
Packing:
? Aerosol 500 mL.
? Barrel of 10 liters (without analysis).
KP-42 Black Magnetic Developer
Features:
Equivalent to B-103 C but in bulk. KP-42 has a medium particle content for achieving
a good indication/background contrast ratio and easier detection.
Flash point 60° C.
Packing:
? Barrel of 10 liters.
WCB-42 Black Magnetic Developer
Features:
200 ml concentrate doses for 10 L of water.
WCB concentrate contains:
Corrosion-inhibitor agent, wetting agent, anti-foaming agent, dual
powder. Using these doses, yields a very effective ink at low cost.
Used on worksite with a spray or on a bench.
Precautions: degrease the parts thoroughly, sensitive to frost.
Packing:
? Box of 6 doses (1 dose for one 10-liter water barrel)
DP-66A Dry Magnetic Powder:
Features:
Fast check without white background, yellow high Temperatures (427°C).
Packing:
? Bucket of 2,3 kg
DP68 Dry Magnetic Powder:
Features:
Fast check without white background, blue high Temperatures (427°C).
Packing:
? Bucket of 2,3 kg.
UW1 dual use Magnetic Powder for underwater check:
Features:
Mixt red magnetic powder intended to be suspended in an aqueous medium.
Used for the finding defects in Magnetic testing under UV, blue actinic or visible
in underwater environment.
Powder Blower PB1
Powder blower for dry powders.
Special Oils
K-5500:
Features:
Oil for dilution, dearomatized, Flash Point > 60°C.
Packing:
? Barrel of 10 liters.
K-9300:
Features:
Oil for dillution, dearomatized, Flash Point > 100°C.
Packing:
? Barrel of 10 litres
深圳华清仪器仪表有限公司销售；来电洽谈：
