1.电动葫芦多安装在U型轨道上。针对这个特点，我们把钢索布置在轨道中间，工字钢上部。钢索采用椎10mm钢丝绳或圆钢，端部用花篮螺栓紧固。
More than 1 electric hoist mounted in U type track. According to this characteristic we put the rope arranged in the middle of the track the I-shaped steel is. Cable using vertebral 10mm wire rope or round end with flower basket bolt fastening.
2.滑动环为两圆环相扣，有一定余量，以避免钢索刮卡。转向环为两圆环用螺栓相连，可自由转动。
The 2 sliding ring to two ring phase buckle have a certain margin in order to avoid cable scratch card. To ring two ring is connected with bolts free rotation.
3.把一个转向环一端套在钢索上，留好电机引线后橡套线固定在转向环下端。然后把多个滑动环一端穿到钢索上，再把橡套线分段固定在滑动环下端。前端接电机，可自由转动。后端接在电源上。
3 a steering ring end is sheathed on the cable keep the lead wire of the motor after the rubber sleeve fixed on the lower end of the ring line steering. Then the multiple sliding ring side wear to the cable then the rubber sleeve fixed on the lower end of the sliding ring line segment. The front end is connected with a motor that can rotate freely. The rear end is connected to the power.
4.在电机的牵引下，以转向环为中心，牵引钢索作直线或圆周运动。
4 in the motor traction with steering ring as the center traction steel straight or circular motion.
5.直轨道也可采用以上方法。
5 straight track also can use the above method.
上海天皋电气有限公司生产滑触线系列产品www.tiangaodq.com电话
