| | |||||||||||||||||||||||||||||||||||
Features | |||
Dimensions (W x H x D): | 10.5 mm x 35.5 mm x 83.7 mm | ||
Sensing range max.: | 0 mm ... 4000 mm through-beam system 1) | ||
Sensing range: | 0 mm ... 160 mm proximity system 0 mm ... 700 mm through-beam system 2) 3) 4) | ||
Light source: | LED 5) | ||
Type of light: | Visible red light | ||
Wave length: | 660 nm | ||
Adjustment: | Potentiometer 10-turn 6) | ||
Time type: | Off-delayed | ||
Delay time: | Selectable by sliding switch: ≥40 ms | ||
Indication: | LED | ||
Sensor/detection principle: | Fiber-optic photoelectric sensor | ||
Angle of dispersion: | Ca. 65 ° | ||
Housing design (light emission): | Rectangular | ||
Focus: | See LL3 fiber-optic data |
1) LL3-TB02 and tip adapter LL3-TA01 2) Objects to be sensed with 90% reflectivity ( |
Mechanics/electronics | |||
Enclosure rating: | IP 66 1) | ||
Supply voltage: | 10 V DC ... 30 V DC 2) | ||
Ripple: | 10 % 3) | ||
Power consumption: | ≤ 30 mA 4) | ||
Switching output: | NPN open collector | ||
Output current Imax.: | ≤ 100 mA | ||
Response time: | ≤ 0.25 ms 5) | ||
Switching frequency: | 2000 Hz 6) | ||
Connection type: | Cable 3-wire 2 m 7) | ||
Cable material: | PVC | ||
Conductor cross-section: | 0.2 mm² | ||
Protection class: | III | ||
Circuit protection: | A B C D 8) 9) 10) 11) | ||
Housing material: | ABS/PC Plastic | ||
Ambient operating temperature: | -25 °C ... +55 °C | ||
Ambient storage temperature: | -40 °C ... +70 °C | ||
Weight: | Ca. 70 g | ||
Cable diameter: | 3.8 mm | ||
Switching mode: | Light/dark switching | ||
Switching mode selector: | Selectable via light/dark selector | ||
UL File No.: | NRNT2.E128350 & NRNT8.E128350 |
1) With correctly attached fibre-optic cable LL3 and closed protection hood 2) Limit values 3) May not exceed or fall short of VS tolerances 4)Without load 5) Signal transit time with resistive load 6) With light/dark ratio 1:1 7) Do not bend below 0 °C 8) A = VS connections reverse-polarity protected 9) B = inputs and output reverse-polarity protected 10) C = interference suppression 11) D = outputs overcurrent and short-circuit protected |