| 一般特性 | ||
|---|---|---|
| Signal type | Digital Input | |
| 供电 | ||
| 连接器 | SL1: 1a(-), 1b(-); 2a(+), 2b(+) | |
| 额定电压 | 19 ... 30 V DC via Termination Board | |
| 纹波 | ≤ 10 % | |
| 额定电流 | ≤ 30 mA | |
| 功耗 | ≤ 500 mW | |
| 功耗 | ≤ 500 mW | |
| 输入 | ||
| 连接器 | SL2: 5a(+), 5b(-) | |
| 额定值 |
acc. to EN 60947-5-6 (NAMUR), see system de |
|
| 开路电压/短路电流 | approx. 10 V DC / approx. 8 mA | |
| 开关点/开关迟滞 | 1.2 ... 2.1 mA / approx. 0.2 mA | |
| 线路故障检测 | breakage I ≤ 0.1 mA , short-circuit I ≥ 6.5 mA | |
| 占空比 | min. 20 ms / min. 20 ms | |
| 输出 | ||
| 连接器 | SL1: 8a, 7a; 10a, 9a | |
| 输出 I | signal ; relay | |
| 输出 II | signal or error message ; relay | |
| 触点负载 | 50 V DC / 0.5 A | |
| 小开关电流 | 2 mA / 24 V DC | |
| 通电/断电 | ≤ 20 ms / ≤ 20 ms | |
| 机械寿命 | 107 switching cycles | |
| Error message output | ||
| 连接器 | SL1: 6b | |
| 输出类型 | open collector transistor (internal fault bus) | |
| Transfer characteristics | ||
| 开关频率 | ≤ 10 Hz | |
| 指令符合 | ||
| 电磁兼容性 |
|
|
|
|
Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Conformity | ||
| 电气绝缘 | EN 50178:1997 | |
| 电磁兼容性 |
NE 21:2006 For further information see system de |
|
| 防护等级 | IEC 60529:2001 | |
| 周围环境 | ||
| 环境温度 | -20 ... 60 °C (-4 ... 140 °F) | |
| 机械特性 | ||
| 防护等级 | IP20 | |
| 重量 | approx. 100 g | |
| 外形尺寸 | 12.5 x 128 x 106 mm (0.5 x 5.1 x 4.2 inch) | |
| 安装 | on Termination Board | |
| Data for application in connection with Ex-areas | ||
| EC-类型 鉴定证书 | BASEEFA 06 ATEX 0093 X | |
|
|
保护型号、类别、组别 |
 II (1)G [Ex ia Ga] IIC II (1)D [Ex ia Da] IIIC I (M1) [Ex ia Ma] I
|
| 符合标准 | PF 08 CERT 1047 X | |
|
|
Group, category, type of protection, temperature class |
II 3G Ex nA nC IIC T4 Gc
|
| 指令符合 |
|
|
|
|
Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010 |
| International approvals | ||
| FM |
|
|
|
|
控制图 | 16-534FM-12 (cFMus) |
| IECEx approval | IECEx BAS 06.0026X | |
|
|
Approved for |
[Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I |
