联系人： 田正兴
联系电话：
公司座机：
****************************
微信：
公司地址：青岛城阳区金岭工业园锦宏西路与路博路交接口
英国凯恩KM950烟气分析仪销售服务中心（Kane950）
英国凯恩KM950产品特点
适用锅炉燃烧测试和污染排放监测
手持式，全中文显示操作简单，便于现场使用
用于锅炉的燃烧测试和烟气污染排放监测
体积小巧，操作简单，同时显示多组分测量结果
可同时测量O2和3个污染气体以及烟气温度，环境温度，烟道压力，效率
自动计算CO2，CO/CO2，过剩空气系数，烟气流速，燃烧效率
传感器 SO2, CO, NO, NO2 任意选择，灵活组合，便于升级
结果显示百分浓度、ppm 与 mg/m3 任意转换
可分别设定不同气体组分的测量报警限
内部特殊的气路设计提高了测量响应速度，减少了SO2、NOx的损失
自动修正烟道工况及烟气的干扰，提高了测量精度
随机存储测试结果
红外遥控打印方式
内置电池连续工作大于6小时
英国凯恩KM950产品优势
内部特殊气路设计大限度地减少了测试中SO2、NOx 的损失
根据烟气状态自动进行传感器交叉干扰修正
大屏幕显示，背光功能方便仪器在昏暗的条件下正常使用
通过压力测量，直接显示烟气的流速
开机后无需按任何键即可直接进入测试界面，简单方便
交直流两用，满充电一次可连续工作6小时
用户可自定义打印内容
英国凯恩KM950烟气分析仪产品参数：
型号KM950（Kane950）
项目分辨率 精度 范围
测量O20.001-0.0030—25％
CO1ppm±20ppm
SO21ppm±5ppm
NO1ppm±5ppm
NO21ppm±5ppm
烟气温度0.1℃1℃±0.3％读数0—1200℃>600℃用高温探针
环境温度0.1℃1℃±0.3％读数0—50℃
压力0.01mbar±0.5％0－150mbar
自动计算CO20.001±0.3％0—燃料分析值
NOX1ppm±5ppm
净温度0.1℃±1℃ ±3％读数0—1100℃
效率0.001±1.0％读数0—100％
过空系数0.001±0.2％0—2885.0％
损失0.001±0.2％0—99.0％
CO/CO20.0001±0.010—0.9999
内置燃料表煤、轻油、无烟煤、天然气、煤气、重油、焦炭
尺寸220×55×120mm
重量1Kg
电源交直流两用220V 50Hz或DC12V
配置标配：主机（内置充电电池）、350mm长探针、尘水过滤器、充电器、便携包、操作手册
选配：红外打印机，1m长探针（内置特氟龙管），1.2m长探针（内置特氟龙管）
备注：除O2外（O2为必测项目），用户可根据需要在 SO2、NO、NO2、CO 四种传感器中任选1-3 个。测量范围也可选择，但不可以同时选择两个浓度的同一传感器。
联系人：田正兴
联系电话：
公司座机：
欢迎新老客户咨询订购，给我一份信任，还您十分满意！
英国凯恩KM950烟气分析仪图片：
Contact: Tian Zhengxing
Tel:
Telephone:
British Kaine KM950 flue gas analyzer national sales and service center (Kane950)
British Kaine KM950 product features
Test and application of boiler combustion - pollution emission monitoring
- handheld, full Chinese display has the advantages of simple operation, convenient on-site operation
- used for boiler combustion and flue gas emission monitoring test
It has the advantages of small volume, simple operation, and display the multi-component measurement results
The simultaneous measurement of 3 gas pollution, flue gas temperature, O2 and ambient temperature, flue pressure, total efficiency
The automatic calculation of CO2, CO/CO2, excess air coefficient, flue gas velocity, combustion efficiency
The sensor SO2, CO, NO, NO2 of arbitrary choice, flexible combination, easy to upgrade
The results showed that the percent concentration of PPM, mg/m3 and arbitrary conversion
Can be set respectively to measure different gas components alarm limit
The gas path design special - the internal to improve the measurement speed of response, reduce SO2 and NOx losses
The interference condition and automatic correction of flue gas, improve the measurement accuracy
The random storage test results
The infrared remote control print
The built-in battery more than 6 hours of continuous work
British Kaine KM950 product advantage
- the internal special gas path design minimizes the test in SO2, the loss of NOx
The automatic correction of sensor cross interference according to the status of flue gas
Large screen display, backlight function convenient instrument normally used in dim conditions
- through pressure measurement, directly display the velocity of flue gas
No need to press any key to boot directly into the test interface, simple and convenient
The AC / DC, a full charge can work continuously for 6 hours
The user can customize the print content
British Kaine KM950 flue gas analyzer product parameters:
Model KM950 (Kane950)
Project resolution accuracy range
Measurement of O2 0.001 -0.003 0 - 25%
CO 1ppm + 20ppm
SO2 1ppm + 5ppm
NO 1ppm + 5ppm
NO2 1ppm + 5ppm
The flue gas temperature is 0.1 DEG C and the temperature is higher than the temperature of 0.3% DEG C and the temperature is measured at a temperature of 0 to 1200 DEG C >600
Ambient temperature 0.1 C / C + + 0.3% reading at 0 - 50 DEG C
The pressure of 0.01mbar + 0.5% 0150mbar
Automatic calculation of CO2 0.001 + 0.3% 0 - Fuel Analysis
NOX 1ppm + 5ppm
Net temperature 0.1 DEG C + + 1 + / - 3% reading - 1100 - 0
Efficiency 0.001 + 1% reading - - 0
Space factor 0.001 + 0.2% 0 - 2885%
Loss 0.001 + 0.2% 0 - 99%
CO/CO2 0.0001 + - 0.010 - 0.9999
The built-in fuel gauge, oil, coal, natural gas, coal gas, heavy oil, coke
Size 220 x 55 x 120mm
Weight 1Kg
Power AC-DC dual 220V 50Hz or DC12V
Standard configuration: host (built-in rechargeable battery), 350mm probe, dust and water filter, charger, portable bag, operation manual
Optional: infrared printer, 1m probe (built-in Teflon tube), 1.2m probe (built-in Teflon tube)
