SMC铝制一体式五通阀VQZ332-5GB1-02,选用方法AW30-N02DG
1.一个范围，它允许附加加工内输入的尺寸。
2.将SMC作出适当的安排，如果没有尺寸，公差，或完成指令
在图中给出。
3.无螺纹部分的长度是2至3的间距。
4.除另有规定外，螺距是基于粗公制螺纹。
P =螺距
M3×0.5，M4×0.7，男5×0.8
M6×1，M8系数1.25，M10×1.5
5.在该图的部分输入所需的数字。
6.此外加工件的倒角面C0.5。
542153 PSEN cs6.1n 1switch
542159 PSEN cs6.1 M12/8 1switch
542180 PSEN cs6.1 1actuator
542181 PSEN cs6.11 M12 1actuator
542183 PSEN cs6.1 M12 1actuator
542200 PSEN cs6.2p/PSEN cs6.1 1unit
542203 PSEN cs6.2n/PSEN cs6.1 M12 1unit
542209 PSEN cs6.2 M12/8/PSEN cs6.1 M12 1unit
542211 PSEN cs6.21 M12/8/PSEN cs6.11 M12 1unit
1. Enter the dimensions within a range that allows for additional machining.
2. SMC will make appropriate arrangements if no dimensional, tolerance, or finish instructions are
given in the diagram.
3. The length of the unthreaded portion is 2 to 3 pitches.
4. Unless specified otherwise, the thread pitch is
P = Thread pitch
M3 x 0.5, M4 x 0.7, M 5 x 0.8
M6 x 1, M8 x 1.25, M10 x 1.5
5. Enter the desired figures in the portion of the diagram.
6. Chamfer face of the parts machining additionally is C0.5.
SMC铝制一体式五通阀VQZ332-5GB1-02,选用方法AW30-N02DG
