PX6000L1-020AV进口压力变送器PX6000L1-020AV出售>
深圳市鑫博恒业科技有限公司
地址：深圳市福田区华强北都会大厦B座27楼S室
电话：
http://www.xb5j.com E-mail:info@xb5j.cn
QQ: 800062763
PX6000L1-020AV
Diffused Semiconductor Pressure Transducer Rugged Aerospace Design
PX6000-MV
CE
Diffused Semiconductor Pressure Transducer
High Reliability
Long Term Stability
All Stainless Steel Case
Vacuum Range Available
5 Point NIST Calibration Certificate Included
OMEGA’s PX6000 Series pressure transducers fit easily into your application. These low-cost transducers are small and light, and mounting requires no bulky structures. You select from 3 electrical terminations and 6 pressure fittings. The sensor is a small [about 2.54 cm (0.1")] square silicon chip with 4 diffused strain gages, mounted in the stainless steel case. Laser-trimmed resistors provide temperature compensation and adjust zero balance and span. The 30 mV full range output is compatible with most amplifiers and data acquisition systems.
The PX6000 uses solid state media isolation for improved reliability. Thin films of chemically inert materials are deposited or grown on the chip surface to provide electrical isolation between the sensor and pressure medium. The sensor is less sensitive to vibration and more dependable in high-shock environments. Corrosion resistance is outstanding, and the isolation will remain effective because there is no gel or oil column to deteriorate.
The PX6000 is also available in metric configurations, with G1/4 or G1/8 ports, and models from 0-1 to 0-25 bar pressure ranges. Please see the PXM6000 for complete details, or contact our Pressure department for more information..
SPECIFICATIONS
ELECTRICAL
Excitation: 10 Vdc
Output: 3 mV/V ± 10%
Input Resistance: 2000 Ω minimum
Output Resistance: 1000 Ω minimum, 1500 Ω maximum
Zero Balance: 0 mV ±5% FSO
Dielectric Isolation Resistance: 100 MΩ minimum at 50 Vdc applied between the case or a conductive medium and the bridge circuit
Sensing Element: 4-active-arm bridge using a micro-machined diffused silicon diaphragm sensor, thin-film media and dielectric isolation barriers
Temperature Sensor: Output resistance @ 24°C (75°F) 900 to 1500 Ω
Temperature Coefficient: 8% min, 10% max per 55.5°C (100°F)
PERFORMANCE
Accuracy: Combined linearity, hysteresis and repeatability ≤±0.25% FS for all ranges
ENVIRONMENTAL
Operating Temp Range: -54 to 150°C (-65 to 300°F)
Compensated Temp Range: -54 to 121°C (-65 to 250°F)
Thermal Effects:
Span: ≤±0.02% of FS/°F
Zero: ≤±0.02% of FS/°F
Vibration Sensitivity: At 35g peak sinusoidal vibration from 10 Hz to 2000 Hz (?" D.A.), the output shall not exceed 0.04% FS/g for 15 psi range to 0.005% FS/g for 100 psi and above
Natural Frequency: Greater than 35 kHz for 100 psi and above
Shock: 100 g, 11 ms half sine wave without damage
PRESSURE
Proof Pressure: 2 times rated pressure will not cause changes in performance beyond the specified tolerances
Burst Pressure: 3 times rated pressure for pressure ranges below 200 psi, or 2.5 times rated pressure for pressure ranges above 200 psi will not cause rupture of the pressure sensor
MECHANICAL
Wetted Parts: 316 stainless steel, silicon nitride, Pyrex? glass, epoxy, Kovar?
Electrical Connection:
Standard: PTIH-10-6P
Optional: 0.6 m (2') cable or 4-pin solder terminal header
Pressure Port:
Standard: MS33656-4 male
Optional: MS33649-4 female, 1/4-18 or 1/8-27 NPT male or female
Weight: 4 oz max, excluding pressure fitting and electrical connection
Mating Connector: PTS06A-10-6S (not included)
注释: Metric Ranges Available - Consult Engineering
产品型号/产品描述
PX6000L1-30VACV 30-0 in-Hg transducer with PT1H-10-6P connector, MS33656-4 male fitting and millivolt output
PX6000L1-015AV 0-15 psi Absolute Pressure transducer with PT1H-10-6P connector, MS33656-4 male fitting and millivolt output
PX6000L1-020AV 0-20 psi Absolute Pressure transducer with PT1H-10-6P connector, MS33656-4 male fitting and millivolt output
PX6000L1-050AV 0-50 psi Absolute Pressure transducer with PT1H-10-6P connector, MS33656-4 male fitting and millivolt output
PX6000L1-100AV 0-100 psi Absolute Pressure transducer with PT1H-10-6P connector, MS33656-4 male fitting and millivolt output
PX6000L1-200AV 0-200 psi Absolute Pressure transducer with PT1H-10-6P connector, MS33656-4 male fitting and millivolt output
PX6000L1-300AV 0-300 psi Absolute Pressure transducer with PT1H-10-6P connector, MS33656-4 male fitting and millivolt output
PX6000L1-015GV 0-15 psi Gage Pressure transducer with PT1H-10-6P connector, MS33656-4 male fitting and millivolt output
PX6000L1-020GV 0-20 psi Gage Pressure transducer with PT1H-10-6P connector, MS33656-4 male fitting and millivolt output
PX6000L1-050GV 0-50 psi Gage Pressure transducer with PT1H-10-6P connector, MS33656-4 male and millivolt output
PX6000L1-100GV 0-100 psi Gage Pressure transducer with PT1H-10-6P connector, MS33656-4 male fitting and millivolt output
PX6000L1-200GV 0-200 psi Gage Pressure transducer with PT1H-10-6P connector, MS33656-4 male and millivolt output
PX6000L1-300GV 0-300 psi Gage Pressure transducer with PT1H-10-6P connector, MS33656-4 male and millivolt output
PTS06A-10-6S Mating connector (sold separately)
产品型号说明
(1) (2) (3) (4) (5) (6)
PX6000 -
选项描述
(1) Pressure Port
选择
L 代表 MS33656-4 Male
M 代表 MS33649-4 Female
A 代表 1/8-27 NPT Male
B 代表 1/8-27 NPT Female
C 代表 1/4-18 NPT Male
D 代表 1/4-18 NPT Female
(2) Electrical Connection
选择
1 代表 PT1H-10-6P Connector or equal (mating connector not included)
0 代表 2' (6m) cable (std) +2$/ft over 2'
3 代表 4-pin Eyelet Header (no charge)
(3) Range
选择
30 代表 30 to 0 in-Hg (Vacuum only)
015 代表 0-15 psi
020 代表 0-20 psi
050 代表 0-50 psi
100 代表 0-100 psi
200 代表 0-200 psi
300 代表 0-300 psi
(4) Units
选择
VAC 代表 Vacuum Model
G 代表 Gage Model
A 代表 Absolute Model
(5) Output
选择
V 代表 mV/V Output
5T 代表 0 to 5 Vdc Output
I 代表 4 to 20mA Output
(6) Options
选择
代表 No Options
-CAL11 代表 11 point NIST Calibration $250 adder
-xxFT 代表 Extra length of cable $2/ft over 3ft
PX6000L1-020AV
PX6000L1-020AV进口压力变送器PX6000L1-020AV出售
