离合器盖及压盘总成综合性能检测机B3

=":if(this.width>600)this.width=600" border=0>

 

1，产品简介Brief Introduction:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" />

流水线高效全规格离合器压盘总成综合性能检测机，

适用于双作用离合器盖及压盘总成以及碟形弹簧的负荷特性的检测，

敞开式台面，六个自动伸缩气液联合压爪，

检测范围：Φ200-Φ330，

检测效率：1次/分（一次检测四项特性），

部分功能及参数指标可按客户要求进行设计、调整。

Comprehensive performance checking machine effectively for clutch pressure plate assembly in the product line. It is the same with double function push clutch pressure plate assembly. Open table-board six pressure fingers which can auto stretch out and draw back by preumatic and fluid drive. Clutch dimension applicable:Φ200-Φ330. Efficiency:1 times/min ( four features by once testing). Parts of accuracy & technical parameter can be accorded to user's requirement.

 

2，主要功能Main Function

正常分离特性的测定（包括：工作点主副压盘压紧力、分离力、压盘升程、压盘平行度、分离指高度）

理想从动盘厚度下整个分离过程中分离行程和分离力与其压盘升程的变化曲线

从动盘磨损到极限时的分离特性（包括：磨损点的压紧力、分离力、大分离力、压盘平行度、压盘升程、分离指高度）

主压盘（靠近飞软端压盘）的负荷特性（进程和回程工作点、峰值点、磨损点和谷点的压紧力）

碟形弹簧的负荷特性

Measurement of release features (Clamping load measurement of pressure plate in working location release load pressure plate lift parallelism height error of finger).

The curve of release load and pressure plate lift in the unearthly thickness that changing in the whole separation process.

The release features of driven plate which is worn to the limits ( Clamping load release load max release load pressure plate parallelism pressure late lift finger height in the wear point).

Load feature of main pressure plate ( near the end flywheel)clamping load in the process and reture point the peak point wear point and the valley point.

Load feature of the disc springs.

 

3，精度及技术指标Accuracy & Technical parameter

技术参数Technical Parameter

产品型号Type：350B3

可否做主分离特性Main Release Feature Or Not：是

可否做副分离特性Secondary Release Feature Or Not：是

可否做主负荷特性Main Load Feature Or Not：是

可否做主磨损特性Main Wear Feature Or Not ：是

检测离合器的范围Clutch Dimension Applicable：Φ200-Φ330

主压盘压紧力满量程Clamping Load Of Main Pressure Plate： 45000N

主、副分离力满量程Main And Secondary Release Load ： 10000N

底盘大行程Maximum Chassis Travel： :namespace prefix = st1 ns = "urn:schemas-microsoft-com:office:smarttags" />100mm

分离杆大行程Maximum Lever Travel ：120mm

主分离指高度误差Height Error Of Main Finger： <0.20mm

副分离指高度误差Height Error Of Secondary Finger ：<0.20mm

主升程及平行度精度Main Lift And Parallelism ：±0.20mm

副升程及平行度精度Secondary Lift And Parallelism：±0.30mm

效率：1次/分（一次检测四项特性）1 times/min(four features by once testing)

主机外形尺寸Dimension： 860×860×760