真空干燥箱价格

真空干燥箱，干燥箱，北京真空干燥箱，（Model DZF Vacuum Drying Oven）
一、Suitable Scope
　　It is applicable to such tests as drying heat treatment.ect.of artides under vacuum conditions in industrial ａnd mining enterprises as well as in nedical colleges ａnd scientific research institues.
二、Characteristies of product
1、 The working chamber is ，made of high quality sheet or corrosion-resistant stainless steel.Toughened hulletproof double glass doorto observe clearly the in the working chamber.
2、 The air-tightness of the chamber door is adjustablewith a wholly shaped silicon rubber door sealing loop;so as to guarantee in-chamber high vacuum.
3、 Intelligent temperature controller is d microprocessor with PID parameters controlling function.Digital display of set ａnd actual temperatures.High temperature controlling accuracy ａnd reliability.
4、Be sure to the temperature is not excess.and the heat up power can be adjusted.

■采用平板式加热器，均匀分布在工作室外壁。 ※Adopting the platetype heater to evenly distribute to heat over the outer wall of the chamber.

■加热器直接装入工作室底部升温快。 ※The heater is installed directly at the bottom of the working chamber for quick temperature use.

（Technical date）: 型号Model DZF-6020 DZF-6021 DZF-6030 DZF-6050 DZF-6051 DZF-6090 DZF-6210 电源电压Mains voltage 220V 50Hz 控温范围Temperature control range RT+10℃～200℃ RT+10℃～150℃ RT+10℃～200℃ RT+10℃～250℃ RT+10℃～200℃ RT+10℃～250℃ 消耗功率Consumption Power 300W 400W 1400W 1350W 1200W 2160W 温度波动Temperature fluctuation ±1℃ 真空度Vacuum degree <133pa 工作室尺寸Dimensions of the working chamber 300×300×275mm 320×320 ×300mm 415×345×370mm 450×450 ×450mm 560×590 ×640mm 工作室材料 Material of working chamber 1Grl8Ni9Ti 08F 1Grl8Ni9Ti 1Grl8Ni9Ti 08F 1Grl8Ni9Ti