Sensyflow FMT200-D is for direct mass and standard volume flow measurement of compressed air and biogas. The measurement is independent of operating pressure and temperature. With turndown ratio of 1:100, it allows metering and leakage detection together in one instrument.
The flowmeter sensor uses the hot film anemometer working principle. This method allows for direct measurement of the gas mass flow. As a result, the normally necessary pressure and temperature compensation and, thus, additional measuring points and the compensation computer can be omitted. 热式质量流量计FMT200-D
Sensyflow FMT200-D plus the corresponding pipe components are installed in a defined way and locked in place as a component of the measuring pipe.
The flowmeter includes the sensor unit and the evaluation electronics which directly provides a linearized output signal. The device is calibrated and ready for operation. An LCI adapter is used to parameterize the output signal.
A standard power supply unit can be used for powering the device.
Overview
Data
– DN 25 to 80 (1 to 3 in.)
– directly from sensor head
– < 2 % of rate
– 10 mbar (1kPa)
如果您想试用该产品，请到下方网址联系我们：
银飞电子主要销售仪器仪表 电力设备 热工仪表 航空器材 校准设备 工具配件。