|
名称 |
Value |
Unit |
|---|---|---|
| Type | 2873 |
|
| Valve function | A - normally inlet port 1 (P/NC) closed |
|
| Fluidic port connection number | 2 | PCE |
| Valve function number of switching positions | 2 | PCE |
| Actuator type | Plunger valve |
|
| Operation | direct-acting |
|
| Main valve operating principle | Globe valve |
|
| Switch function | constant |
|
| Main valve orifice 1 (P) (mm) | 1.5 | mm |
| Main valve orifice 1 (inch) | 1/16 inch |
|
| Sealing toward outside material | FKM (Fluor rubber) |
|
| Seat seal material category | Elastomer |
|
| Seat seal material | FKM (Fluor rubber) |
|
| Main valve wetted material | Stainless steel |
|
| Core guide | Form spring |
|
| Core guide 2 | Form spring |
|
| Vacuum version | No |
|
| Analysis version | No |
|
| Oxygen version | No |
|
| Steam version | No |
|
| Media separation | No |
|
| Flow | Below seat |
|
| Port connection 1 type | Inner thread |
|
| Port connection 1 thread type | G |
|
| Port connection 1 thread marking | 1/8 |
|
| Port connection 2 type | Inner thread |
|
| Port connection 2 thread type | G |
|
| Port connection 2 thread marking | 1/8 |
|
| Voltage / rated voltage | 24 | V |
| Voltage / rated voltage | 24 | V |
| AC voltage | No |
|
| DC voltage | Yes |
|
| Voltage tolerance positive | 10 | % |
| Voltage tolerance negative | 10 | % |
| Coil type | block bolted |
|
| Coil insulation material (encasement) | Epoxy |
|
| Coil size | 32 | mm |
| Protection type (IP max. with suitable connector) | 65 |
|
| Thermal insulation class of the actuator | H |
|
| Rated power consumption | 9 | W |
| Electrical connection sort | Plug pattern form A according to DIN EN 175301-803 |
|
| Electrical connection number of contacts | 2 + Grounding conductor |
|
| Electrical connection type | male |
|
| Cable plug in delivery | not included |
|
| Electrical connection position | in direction of flow left |
|
| Kv value (water) | 0.06 | m3/h |
| QNn value (gas) | 65 | l/min |
| PWM frequency min. | 1100 | Hz |
| PWM frequency max. | 1200 | Hz |
| Operating range | 1:200 |
|
| Nominal operation/Duty cycle | 100 | % |
| Nominal pressure min | -1 | bar |
| Nominal pressure max | 10 | bar |
| Differential pressure max | 5 | bar |
| Temperature medium min | -10 | °C |
| Temperature medium max | 90 | °C |
| Temperature environment min | -10 | °C |
| Temperature environment max | 55 | °C |
| Mounting position | any |
|
| Medium-contacting part core material | Stainless steel |
|
| Medium-contacting part stopper material | Stainless steel |
|
| Medium-contacting part core guide tube material | Stainless steel |
|
| Medium-contacting part core guide element 1 material | Stainless steel |
|
| Medium-contacting part core guide element 2 material | Stainless steel |
|
| Weight | 0,296000 | kg |
| Weight | 0,296000 |
|
Type 8605
比例阀的电子控制设备
Type 2508
插头形状 A
Type 8611
eCONTROL 通用调节器