SALAMI齿轮泵-深圳市诺希德科技有限公司

意大利SALAMI齿轮泵

SALAMI萨拉米。Salami gear pumps gear motors and directional control valves

Standard hydraulic gear pump 液压齿轮泵

Hydraulic valve: Monoblock valve 方向控制阀

Hydraulic gear pump in alluminium alloy 铝合金齿轮泵

Hydraulic valve: Sectional valve 截止阀

Hydraulic valve: Pressure compensated valve压力补偿阀

诺希德极优价销售SALAMI齿轮泵、详情请联系：深圳市诺希德实业有限公司

电话：传真：83789378 网址：www.rosit.com

Gear Pumps and Motors

B series

Gear pumps and motors in aluminium alloy.Displacements from 1 to 142 cm3/rev. (from 0.06 to 8.55 cu.in rev.)
Maximum pressure up to 300 bar (4300 psi) Available in European German and u.s. standards.

ADVANTAGES :
Low noise level Easy combination in multiple units High efficiency Considerable reliability.

G R O U P	Type	Displacement cm³/rev. cu.in/.rev.	Working Pressure P1 bar/psi	Peak Pressure P3 bar/psi	Max/Min Speed rpm
1	1PB 1.1	1.06/0.06	210/3000	260/3750	1000/5000
	1PB 1.3	1.25/0.07	210/3000	260/3750	1000/5000
	1PB 1.6	1.65/0.09	210/3000	260/3750	1000/5000
	1PB 2	2.12/0.12	210/3000	260/3750	1000/5000
	1PB 2.5	2.65/0.16	210/3000	260/3750	1000/5000
	1PB 3	3.18/0.19	210/3000	260/3750	1000/5000
	1PB 3.5	3.71/0.22	190/2715	240/3450	1000/5000
	1PB 4	4.24/0.25	190/2715	210/3000	800/4000
	1PB 4.5	4.77/0.28	180/2600	200/2900	800/4000
	1PB 5.5	5.83/0.35	180/2600	200/2900	800/4000
2	2PB 4.5	4.6/0.35	250/3600	300/4300	600/4000
	2PB 6.2	6.5/0.37	250/3600	300/4300	600/4000
	2PB 8.3	8.2/0.50	250/3600	300/4300	500/3500
	2PB 11.3	11.5/0.68	250/3600	300/4300	500/3500
	2PB 13.8	13.8/0.84	250/3600	300/4300	500/3500
	2PB 16	16.6/0.97	250/3600	300/4300	400/3000
	2PB 19	19.4/1.15	220/3140	260/3750	400/3000
	2PB 22.5	22.9/1.37	200/2900	240/3450	400/2750
	2PB 26	25.8/1.58	180/2600	220/3140	400/2500
2.5	2.5PB 16	16/0.96	250/3600	300/4300	600/3000
	2.5PB 19	19.3/1.15	250/3600	300/4300	600/3000
	2.5PB 22	22.2/1.35	250/3600	300/4300	500/3000
	2.5PB 25	25.2/1.54	250/3600	300/4300	500/3000
	2.5PB 28	27.3/1.63	250/3600	300/4300	500/3000
	2.5PB 32	32.5/1.95	230/3600	260/3750	500/3000
	2.5PB 38	38.2/2.29	200/2900	240/3450	400/2750
	2.5PB 44	44.3/2.65	180/2600	210/3000	400/2000
3	3PB 21	20.6/1.25	250/3600	300/4300	600/3000
	3PB 27	27/1.65	250/3600	300/4300	600/3000
	3PB 33	33.5/2.00	250/3600	300/4300	500/3000
	3PB 38	38.7/2.36	250/3600	300/4300	500/3000
	3PB 46	46.9/2.83	245/3500	275/3950	500/2750
	3PB 55	54.1/3.3	210/3000	250/3600	400/2500
	3PB 65	63.1/3.85	200/2900	240/3450	400/2250
3.5	3.5PC 55	54.8/3.34	250/3600	300/4300	500/2750
	3.5PC 64	63.2/3.85	250/3600	300/4300	500/2750
	3.5PC 75	74.7/4.55	230/3300	280/4000	400/2500
	3.5PC 87	88/5.36	210/3000	260/3750	400/2250
4	4PB 68	68.7/4.12	250/3600	300/4300	600/3000
	4PB 82	82.5/4.95	250/3600	300/4300	600/3000
	4PB 103	102.5/6.15	225/3250	280/4000	500/2500
	4PB 125	125/7.5	210/3000	250/3600	500/2500
	4PB 142	142.5/8.55	200/2900	240/3450	500/2400

Directional Control Valves

ADVANTAGES :
Very low leakage between spool and body
Very good metering characteristics
Spools interchangeability

Monoblock

Deliveries up to 75 lt/min (21 US gpm) and
Pressures up to 315 bar (4560 psi)
High resistance cast iron bodies from
1 to 6 spools
Specifications: hardened and chrome plated steel
Alloy spools ; optional auxiliary valve on B port side.

Modular valves

Deliveries up to 250 It/min ( 70 US gpm )
Pressures up to 350 bar (5100 psi)
Available in LOW VERSION the cheapest one with Optional auxiliary valves on the B port side and in HIGH VERSION with optional auxiliary valves on A And B port High resistance cast iron body with 1 to 10 sections.

Specifications: hardened and chrome plated steel
Alloy spools

Directional Control Valves

SALAMI

ZENIT

Gear pumps with double gearing in aluminium alloy.
Displacements from 5 to 225 cm3/rev (from 0.31 to
1.37 cu.in./rev.).
Maximum pressures up to 275 bar (3900 psi).

ADVANTAGES:
Important reduction of noise level in
Comparison with traditional external gear pumps
Expecially suitable for all applications where
A low noise level is required such as:
Maintenance and industrial power packs.

H series

Gear pumps and motors in spheroidal cast iron.
Displacements from 30 to 80 cm3/rev (from 1.83
To 4.88 cu.in./rev.).

ADVANTAGES:
Developed for high loads
Oil contamination and non flammable fluids
Resustant
Many versions available.

QUASAR

Load sensing directional control valves for fixed or
Variable displacement pumps. Option of compensation
On every section; deliveries up to 220 It/min ( 58 US
Gpm ) and pressures up to 350 bar ( 5100 psi )

ADVANTAGES:
Operation of more then one user simultaneously
And without interaction
High control capacity
Energy saving.

SALAMI齿轮泵

发布时间：2018-01-26