原装ATOS叠加式单向阀,阿托斯叠加式单向阀规格
装配位置/位置任何位置液压液压油符合DIN 51524 ... 535;
粘度15÷100 mm2/ s - 大允许范围2,8÷500 mm2
Flow as shown in the symbol
Rated flow see section Q / Δp
They are designed for operation
Hydraulic system
Mineral oil or synthetic fluid
Similar lubrication characteristics.
额定流量见截面Q /Δp
它们设计用于操作
液压系统
矿物油或合成流体
Check valve is the check valve Swing check valve installation location is not restricted,
Usually installed in the horizontal pipe, but can also be installed on the vertical pipe or inclined pipe.
Otherwise need to use the type of leakage to reduce the control oil pressure.
SADR is a direct operation Check the valve port size for online installation from 1/4 "to 11/4" GAS.
可使用在线过滤器 - 25μm（β10_> 75）
流体温度T≤80°C
流向如部分的符号所示
流体污染等级ISO 4406等级21/19/16 NAS 1638等级10，
单向阀控制油的泄漏方式有内泄式和外泄式二种。
在油流反向出口无背压的油路中可用内泄式；
Mounting position / position Any position Hydraulic hydraulic oil according to DIN 51524 ... 535;
Recommended viscosity 15 ÷ 100 mm2 / s - Maximum permissible range 2,8 ÷ 500 mm2
Fluid Pollution Degree ISO 4406 Level 21/19/16 NAS 1638 Level 10,
One-way valve control oil leakage method has two kinds of internal and open type.
In the reverse flow of oil flow without the back pressure of the oil can be used within the vent;
Can use the online filter - 25μm (recommended β10_> 75)
Fluid temperature T ≤ 80 ° C
类似的润滑特性。
单向阀就是止回阀 旋启式止回阀安装位置不受限制，
通常安装于水平管路，但也可以安装于垂直管路或倾斜管路上。
否则需用外泄式，以降低控制油压力。
SADR是直接操作检查用于在线安装的阀门端口尺寸从1/4“到11/4”GAS。
原装ATOS叠加式单向阀,阿托斯叠加式单向阀规格
