EUCHER安全继电器规格,好性能安士能安全继电器
Rated insulation voltage Ui 250 V
Pollution level (external, according to EN 60947-1) 2
Wire cross section 0.14 ... 2.5 mm2
In S12-S13 and S22 and S23 24V
These two buttons 2 times 40 mA
爬电距离/电气间隙为4kV
根据IEC EN 60664-1 3过压类别
supplemented with the expansion module output side.
The advantage of the ESM modularization principle is that different safety
assessments with several variants of the module can be achieved.
Up to 4 categories, according to EN ISO 13849-1
额定绝缘电压Ui 250 V
污染等级（外部，根据EN 60947-1）2
导线截面0.14 ... 2.5平方毫米
在这一系列的模块通常安装在22.5毫米宽的住房。
各种安全设备可用，可以补充有扩展模块输出侧。
的ESM模块化原理的优点在于，与几个模块的变体的不同的安全评估可以实现。
LED display for relay K1 and K2 2 status indicator (green)
Safety contacts 13/14, 23/24
NO relay contacts, voltage freedom and constraints (redundant)
The creepage distance / clearance is 4 kV
在S12-S13和S22和S23 24V
这两个按钮2倍40毫安
继电器K1和K2的LED显示2状态指示灯（绿色）
安全触点13/14，23/24
NO继电器触点，电压自由和约束（冗余）
According to IEC EN 60664-1 3 overvoltage category
In this series of modules are usually installed in 22.5 mm wide housing.
Various safety devices are available and can be
EUCHER安全继电器规格,好性能安士能安全继电器
