介绍SMC小型气动滑台,MXQ25-20BS
Compared with the MXU, the allowable torque is increased by about 6 times.
Can be piped from 3 directions.
* Standard type rubber cushion at both ends.
* Allows the torque to be six times that of the MXU series.
＊ 标准型内置磁环，可安装行程感应磁性开关。
＊ 可从三面连接气源。
＊ 可两面安装磁性开关。
无端部轨道的直线导轨与工作台一体化。
小型直线导轨与工作台一体化。
由于采用小型直线导轨，滑台气缸具有优良的线性度及不回转精度。
可从3个方向配管。
装上线性导向轴承，提高活塞杆不回转精度。
Small linear guide and table integration.
Due to the use of small linear guide,
slide cylinder with excellent linearity and non-rotation accuracy.
由于采用小型直线导轨，滑台气缸具有优良的线性度及不回转精度。
与MXU比较，允许力矩提高约6倍。
可从3个方向配管。
* Can be installed on both sides of the magnetic switch.
The linear guide of the endless track is integrated with the workbench.
Due to the use of small linear guide,
slide cylinder with excellent linearity and non-rotation accuracy.
＊ 标准型两端橡胶缓冲。
＊ 允许力矩为MXU系列的六倍。
Can be piped from 3 directions.
Install linear guide bearings to improve the accuracy of the piston rod does not turn.
* Standard built-in magnetic ring, can be installed stroke induction magnetic switch.
* Connect air supply from three sides.
介绍SMC小型气动滑台,MXQ25-20BS
