SRL1-500/B64南京斯沃消防电源电压型监控模块

发布时间:2021-04-11

|SRL1-500/B64-内容提要(Synopsis)

******销售   189  、6369、7816****** 

SRL1-500/B64消防电源电压型监控模块实时监测所有消防设备主、备电源的工作状态和故障报警信息,并将工作状态和报警信息传输给消防控制室图形显示装置,系列电压/电流信号传感器,满足GB28184-2011《消防设备电源监控系统》的要求,

SRL1-500/B64南京斯沃消防电源电压型监控模块

 

|SRL1-500/B64细节描述(Detailed deion)
·程序为我公司独立开发,可以根据客户的需求予以定制特殊的功能;
·继电器采用的是国内,使用寿命比常规的要好的多;继电器正常的在六万次以上,其他在七千次左右;
·所有出厂的产品都有刷三防漆,防水、防潮、防腐方面都要好;核心件都是进口件。

·The program is independently developed by our company, and special functions can be customized according to the needs of customers;

·The relay adopts domestic famous brands, and its service life is much better than that of the conventional ones; the normal relay is more than 60000 times, and other brands are about 7000 times;

·All factory products are painted with three proofing paints, which are better in waterproof, moisture-proof and anti-corrosion aspects; the core parts are imported ones.


|
SRL1-500/B64消防电源电压型监控模块

■ SRL1-500/B64监测功能:监测消防电源电压、电流异常状态:主、备电源的过压、欠压、过流、错相、缺相、供电中断等故障状态
■ 统计功能:统计故障信息,形成SOE记录
■ 故障/报警功能:灯光报警
■ 通讯功能:通过智能通讯总线,将信息以数字化的形式进行远程传输,具有高度抗干扰能力
■ 其它功能:自检重要元器件;存储64条报警和故障记录,掉电后可保存10年

■ SRL1-500/B64monitoring function: monitoring the abnormal state of fire power supply voltage and current: overvoltage, undervoltage, overcurrent, wrong phase, missing phase, power supply interruption and other fault states of main and standby power supply
■Statistics function: Statistics fault information and form SOE record
■Fault / alarm function: light alarm
■Communication function: remote transmission of information in digital form through intelligent communication bus, with high anti-interference ability
■Other functions: self check important components; store 64 alarm and fault records, which can be sed for 10 years after power failure

 

|SRL1-500/B64产品图片(Product picture)

SRL1-500/B64南京斯沃消防电源电压型监控模块

 

|SRL1-500/B64技术指标(Technical index)
SRL1-500/B64供电电压 DC24V由监控器或区域分机集中供电
额定功率 <0.5W
总线通信方式 CAN总线
通信线+电源线要求 NH-RVS2*1.5mm2(通信线)+NH-BV2*2.5mm2(电源线)
输出参数 1路无源触点,报警或控制输出
地址编码 每台传感器均具有地址编码
测量范围  AC20~500V DC10~30V AC0~1000A DC0~100A
隔离器         每台传感器内自带隔离器
报警参数 过压>额定电压的110%,欠压<额定电压的85%,电流报警值现场设定
报警显示 LED指示
报警延时 0~60S连续可调,现场可设定
环境温度  -20℃~+70℃
环境湿度 相对湿度≤95%
海拔高度 <4500m
防护等级 IP30
外形尺寸 110mm*85mm*45mm(长*宽*高)
安装方式 标准35mm导轨式安装

The power supply voltage is ﹥ DC24 V, which is supplied by the monitor or regional extension
Rated power < 0.5W
Bus communication mode: can bus
Communication line + power line: nh-rvs2 * 1.5mm2 (communication line) + nh-bv2 * 2.5mm2 (power line)
Output parameter: 1-way passive contact, alarm or control output
Address code each sensor has a unique address code
Measuring range: ac20 ~ 500V, DC10 ~ 30V, ac0 ~ 1000A, dc0 ~ 100A
Isolator each sensor has its own isolator
Alarm parameters: overvoltage > 110% of rated voltage, undervoltage < 85% of rated voltage, current alarm value is set on site
Alarm display LED indication
The alarm delay can be adjusted continuously from 0 to 60s, and can be set on site
Ambient temperature - 20 ℃~ + 70 ℃
Ambient humidity: > relative humidity ≤ 95%
Altitude < 4500m
The protection level is less than IP30
Overall dimension: 110mm * 85mm * 45mm (L * w * h)
Installation method: Standard 35mm rail installation

【内部随机图片】

 


|SRL1-500/B64安装注意事项(Installation precautions)
模拟各种故障情况,观察并记录监控器及传感器的工作状态。 系统调试,应先分别对传感器和监控器逐个进行单机通电检查,无故障报警、自检等操作时方可进行系统调试。  传感器(或金属箱)应独立支撑或固定,安装牢固,并应采取防潮、防腐蚀等措施。 

 

|SRL1-500/B64试验设备(Test equipment)
每一个设备出厂前都会经过一整套完整的试验流程以保证它的品质:
--Step 1--静电放电发生器
--Step 2--多功能抗干扰测试
--Step 3--可程式恒温湿试验机
--Step 4--老温老化房
--Step 5--初校验台
--Step 6--复校验台
--Step 7--电能走字台

 Every equipment will go through a complete set of test process before leing the factory to ensure its quality
--Step 1 -- electrostatic discharge generator
--Step 2 -- multi function anti interference test
--Step 3 -- programmable constant temperature and humidity testing machine
--Step 4 -- aging room
--Step 5 -- preliminary calibration platform
--Step 6 -- recheck bench
--Step 7 -- electric energy walking platform

 

 |SRL1-500/B64相关电工知识(Relevant electrical knowledge)

  但是很有可能你就此告别了电气——这个古老但是很有活力的行业。或者工业企业……如此,你就是外行入门一切从头开始,你大学学的那些东西除了人文类学科其他基本用不上。你需要做的工作(保底工作):2)至少从游戏或者恋爱中学到一点东西吧。  是耗电的,虽然微乎其微,但足够危险。首先,用普通人也能理解的办法说说耗电充电器,就是将我们家里的220V交流电,转换成5V左右的直流电给充电。值得注意的是,即使不插充电,220V转5V的这个部分的电路也是工作的,至少要维持涓涓细流状态。  *艰苦的是工程局。因为要随着工程地点到处跑。但是工资也不低。而且还可以向自动化、电子等方向转行。*重要的是干这一行永远都不会为找不到工作而发愁。虽然开始几年比较苦,拿的钱也不多。但是随着你的工作经验的增长,那你的待遇就会提高得很快。 

 

|团队实力(Team strength)
我们专注于中低压电气元器件的开发和生产,具备一支10年行业经验的优良产品研发团队。
一、研发团队
公司每年将营业收入的10%投入到研发和技术创新方面,以确保优先一步的技术与产品
二、技术团队
*的维保和售后技术已解决您的后顾之忧
三、销售团队
定期组织员工进行*知识培训以及现场实勘

We focus on the development and production of medium and low voltage electrical components, and he an excellent product R & D team with 10 years of industry experience.
1、 R & D team
Every year, the company invests 10% of its revenue into R & D and technological innovation to ensure the priority of technology and products
2、 Technical team
Professional maintenance and after-sales technology has solved your worries
3、 Sales team
Regularly organize staff to carry out professional knowledge training and field survey

 

========SRL1-500/B64南京斯沃消防电源电压型监控模块南京斯沃为您服务!=========

========SRL1-500/B64南京斯沃消防电源电压型监控模块南京斯沃为您服务!=========

 

上一篇:欢迎—广州边坡绿化护坡袋—广州股...
下一篇:湖南锅炉烟囱拆除公司/欢迎光临