burster 8431-5500

Especially flat design

Small measuring ranges

Made of stainless steel

High resonance frequencies

Accuracy from < 0.5 % F.S.

Model 8414 with mechanical overload protection

Application

 

These subminiature compression load cells have to be installed very carefully. They must be mounted on a flat andeven surface using contact adhesive wax or a small laminated spring to hold the sensor body down. Preloads which could have a direct impact on the sensor body and clamping the sensor on its sheath are to be avoided.

 

The measuring force has to be applied centrically and free from lateral forces which have to be kept away from the sensor using levers or guideways. Mounting must always be performed manually without use of power tools. Overload damage during the mounting process can be passively prevented by electrically connecting the sensor and displaying the force value.

Deion

 

The subminiature compression load cells are flat cylindrical discs with covered bottoms. The load application button for receiving the compression forces is an integrated part of the top which is the sensor‘s membrane. The strain gauges are applied on the back and wired to a full Wheatstone bridge which results in voltage output proportional to the load applied.

 

The connecting cable of the load cell features a covered correction network on a small board. The sensor‘s temperature compensation is installed here.

 

Due to its extremely small dimensions this model is perfect for use in applications with limited space. The small diameters result in high resonance frequencies.

Accessories

 

Model 9941

Mating connector

12 pins to all burster instrumentations in table housing

 

Model 9900-V209

Mating connector

9 pins to model 9235 and 9310

 

Order code 99004

Mounting of mating connector to conductor cable