GLD3-RT/115/147倍加福光电槽传感器电气规格

GLD3-RT/115/147倍加福光电槽传感器电气规格

光源LED
光型调制可见红光
CE
美国cULus
加拿大cULus
叉宽3 mm
指标/操作手段
功能显示2个LED
电气规格
工作电压UB 10 ... 30 V DC
波纹10％
空载电源电流I0≤45 mA
产量
开关类型亮/暗
信号输出1 NPN和1 PNP
短路和过载保护
反极性保护
开关电流大 150 mA
电压降Ud≤1.5 V
开关频率f 5 kHz
响应时间≤100μs
环境条件
环境温度-40 ... 70°C（-40 ... 158°F）
存储温度-40 ... 70°C（-40 ... 158°F）
机械规格
防护等级IP66
连接2米固定电缆
材料
外壳热塑PPS
光面zylex
电缆PVC
质量82.21克
Programming standard labels:
1. Use the external alignment guides on the sensor housing to position the
alignment dot over the label gap
2. Push the teach button labeled "Normal" for 1 second
3. The green Autoset LED will several times very fast during the teach process
If the teach is successful, the green Autoset LED will be ON.
If the teach is not successful, both the green Autoset LED and the red Output LED
will 2 times very slow, then the green Autoset LED will be ON.
Programming translucent labels:
1. Use the external alignment guides on the sensor housing to position the
alignment dot over the label gap
2. Push the teach button labeled "Translucent" for 1 second
3. The green Autoset LED will several times very fast during the teach process
If the teach is successful, the green Autoset LED will be ON.
If the teach is not successful, both the green Autoset LED and the red Output LED
will 2 times very slow, then the green Autoset LED will be ON.
Light On/Dark On:
The output of the sensor can be inverted by pressing both the Normal button and
Translucent simultaneously. The red Output LED and the sensors output will
change states

GLD3-RT/115/147倍加福光电槽传感器电气规格