A11VLO260LRDH2/11R-NSD12K17柱塞泵的工作原理
柱塞泵是液压系统的一个重要装置。它依靠柱塞在缸体中往复运动，使密封工作容腔的容积发生变化来实现吸油、压油。柱塞泵具有额定压力高、结构紧凑、效率高和流量调节方便等优点，被广泛应用于高压、大流量和流量需要调节的场合，诸如液压机、工程机械和船舶中。
柱塞泵是往复泵的一种，属于体积泵，其柱塞靠泵轴的偏心转动驱动，往复运动，其吸入和排出阀都是单向阀。当柱塞外拉时，工作室内压力降低，出口阀关闭，低于进口压力时，进口阀打开，液体进入;柱塞内推时，工作室压力升高，进口阀关闭，高于出口压力时，出口阀打开，液体排出。当传动轴带动缸体旋转时，斜盘将柱塞从缸体中拉出或推回，完成吸排油。
A11VLO260LRDH2/11R-NSD12K17A11VLO260LRDH2/11R-NSD12K17
产品型号:
A11VO40LRS/10R-NSC12N00
A11VO40LRS/10R-NPC12N00
A11VO40LRH2/10R-NSC12N00
A11VO40LRH2/10R-NPC12N00
A11VO40DRS/10R-NSC12N00
A11VO40DRS/10R-NPC12N00
A11VO60LRS/10R-NSC12N00
A11VO60LRS/10R-NPC12N00
A11VO60LRS/10R-NSC12K01
A11VO60LRS/10R-NPC12K01
A11VO60LRH2/10R-NSC12N00
A11VO60LRH2/10R-NPC12N00
A11VO60LRH2/10R-NSC12K01
A11VO60LRH2/10R-NPC12K01
A11VO60DRS/10R-NSC12N00
A11VO60DRS/10R-NPC12N00
A11VO60DRS/10R-NSC12K01
A11VO60DRS/10R-NPC12K01
A11VO75LRS/10R-NSD12N00
A11VO75LRS/10R-NPD12N00
A11VO75LRS/10R-NSD12K01
A11VO75LRS/10R-NPD12K01
A11VO75LRH2/10R-NSD12N00
A11VO75LRH2/10R-NPD12N00
A11VO75LRH2/10R-NSD12K01
A11VO75LRH2/10R-NPD12K01
A11VO75DRS/10R-NSD12N00
A11VO75DRS/10R-NPD12N00
A11VO75DRS/10R-NSD12K01
A11VO75DRS/10R-NPD12K01
A11VO95LRS/10R-NSD12N00
A11VO95LRS/10R-NPD12N00
A11VO95LRS/10R-NSD12K01
A11VO95LRS/10R-NPD12K01
A11VO95LRH2/10R-NSD12N00
A11VO95LRH2/10R-NPD12N00
A11VO95LRH2/10R-NSD12K01
A11VO95LRH2/10R-NPD12K01
A11VO95DRS/10R-NSD12N00
A11VO95DRS/10R-NPD12N00
A11VO95DRS/10R-NSD12K01
A11VO95DRS/10R-NPD12K01
A11VO130LRS/10R-NSD12N00
A11VO130LRS/10R-NPD12N00
一般在带式输送机长度较短时或带式输送机双向运行时采用此方法比较合理，原因是较短带式输送机更容易跑偏并且不容易调整。而长带式输送机好不采用此方法，因为调心托辊组的使用会对输送带的使用寿命产生一定的影响。头部驱动滚筒或尾部改向滚筒的轴线与输送机中心线不垂直，造成输送带在头部滚筒或尾部改向滚筒处跑偏。滚筒偏斜时，输送带在滚筒两侧的松紧度不一致，沿宽度方向上所受的牵引力Fq也就不一致，成递增或递减趋势，这样就会使输送带附加一个向递减方向的移动力Fy，导致输送带向松侧跑偏，即所谓的跑松不跑紧。
以上型号不全~可咨询~
