VE3008
VE3008 VIE端子板。该板用外部I/O端接。这主要用于GE Speedtronic Mark VIE系列。此外，Mark VIE是一个灵活的多应用平台。它还为单工、双冗余和三冗余系统提供高速网络I/OI00STCIH2A是一种填充有SMD组件和连接器的多层PCB。接线板的一部分是可拆卸连接器。个人*；https://www.kniocauto.com/ 
STCI端子板也有不同版本可靠性IS200STCIH2A板非常可靠，因此不易损坏。但操作不当和存储不良会影响卡的功能。因此，我们建议在建议的条件下将卡存放在静电敏感存储箱中IS200STCIH2A是GE根据Mark VI系列开发的单触点输入端子板。Simplex Contact Input端子板是一种小触点输入端子板，设计用于DIN导轨或平面安装。该板接受来自外部电源的24触点输入，标称24、48和125 V dc励磁。触点输入具有噪声抑制功能，以防止浪涌和高频噪声。PAIC I/O块与模块兼容。I/O块插入D型连接器，并通过以太网与控制器通信。仅支持单工系统。
IS200STCIH2A安装
STCI与塑料绝缘体一起安装在钣金托架上，然后将其安装在DIN导轨上。
STCI加绝缘体可以安装在金属板组件上，然后用螺栓固定在机柜中。触点输入通常使用#18 AWG电线直接连接至接线板。
护罩应端接在单独的支架上。STCIH2有一个直角集管，可接受各种商用可插拔接线端子，共52个端子。
活动
功能和车载信号调节与TBCI上的相同，但它们适用于24、48和125 V dc励磁。输入励磁范围分别为16至32 V dc、32至64 V dc和100至145 V dc。阈值电压为励磁电压的50%。图中显示了触点感应电路。在前21个电路上，触点输入电流限制为2.5 mA，在电路22至24上限制为10 mA。
通过重置聚合物正温度系数保险丝，24 V直流电源的电流限制为0.5 A。滤波器可降低高频噪声，并抑制信号输入点附近每个输入端的浪涌。离散输入电压信号被路由到I/O处理器，后者将其转换为数字信号并发送给控制器。
IS200STCIH2A特性
E1和E2是端子板两侧端子环上的标签。
一个37针（内螺纹）D型连接器和一个三位内螺纹插头与电路板上的端子排相对。
在木板的短边上，在木板上切下两个圆孔，一个相对另一个。板上还有80多个电阻器、电容器、二极管和单个集成电路
Control strategies and system configurations created onearlier DeltaV systems can be used with this controller.The SQ controller provides all the features and functionsof the M-series controllers including support for CHARMd Electronic Marshalling.The control languages executed in the controllers aredescribed in the control software product data sheet.Scalable controllers. The SQ controller complements theSX controller by providing a smaller controller platform ata reduced price for those small to moderate applications: Speed. The SQ controller supports all the features you’vecome to expect from the DeltaV system: self-addressing,automatic I/O detection. All these features are designedto make your projects execute faster — just plug and play! Redundant Architecture. The SQ controller supports1:1 redundancy for increased availability. Redundant SQ
controllers can be upgraded to SX controllers online — robust!
Late Changes. You can easily upgrade an SQ controller
to an SX to handle project scope changes late in the
project. Simply replace the SQ with the SX and all existing
configuration, documentation and hardware design remain
the same — forgivingControl modules are automatically scheduled by the controller,
d on their assigned scan rates. This allows each control
function to be optimized d on the process dynamics.
Modules scan times can be set as fast as 100 ms, and as slow
as 60 seconds. The number of control modules that can be
assigned to a controller depends on the complexity and scan
rate of each module, and the available CPU and memory.
The SQ controller should be used for small to medium
applications with a maximum of 750 individual I/O signals.
The SQ controller is designed for harsh environments and
is rated for G3 corrosive environments, with an operating
temperature range from -40 to 70°C. It is ideally suited for
remote installation, close to the process equipment. For more
traditional installations with central marshalling cabinets,
CHARM I/O Cards can be mounted in standard I/O cabinets
providing Electronic Marshalling. CHARM I/O Cards can also
be used for highly distributed I/O applications.除了传统的I/O卡，本地总线还支持
现场总线技术，
Profibus DP、DeviceNet和AS-i协议。I/O子系统
还支持串行接口卡和以太网I/O
界面这些不同的I/O产品提供了广泛的
接口，以满足控制应用程序的需要。
SQ控制器还支持CHARM和WirelessHART
I/O卡。CHARM I/O卡（CIOC）通过
控制器的冗余以太网端口，以提供
高度分布式和灵活的I/O解决方案，称为Electronic
编组。*多16个CIOC可以与一个
控制器，每个控制器提供多达96个可单独配置的
信号类型。
SQ控制器的容量限制可能因
在特定应用中，CHARM I/O信号的数量
以及控制性能要求。增强
内存处理和硬件警报，涵盖容量和
通过索引将内存添加到诊断信息中
SQ控制器。
无线HART I/O卡（WIOC）提供冗余
*多100个无线HART设备的通信，提供
无线数据的高可用性和可靠性。*多16个
无线HART I/O卡可以与一个控制器通信，
每个提供多达100个信号。The first firmware version for the PTQ-PDPMV1 that supported HSBY was version 1.15. That version and successive versions up until version 1.25 could support only one (1) PTQ-PDPMV1 module per HSBY CPU chassis. Starting with version 1.25 and later, you can have up to four (4) PTQ-PDPMV1 modules per HSBY chassis.
