PROSOFT5205-MNET-PDPS
PROSOFT5205-MNET-PDPS port 1to ground and port tosupporting serial ASCII communications (bar code scanners, linelogic power isolationprinters, legacy teminal d computer systems, etc).Shipped wih Each UnilMini DIN lo DB- 9M serial cablesThe serial 
port on the gateway is userconfigurable to support ASCII
4ft RS 232 configuration cable
communications (Baud rate, Data Bits, Stop Bits, etc). The ASCI
2.5mm screwdriver
port can act as a Master (Send ASCII strings) or as a Slave (Receive
CD (docs and Conliguration uill)
ASCII strings). or both.
RS- 4221485 DB-9 to Screw Terminal
ASCII Specifications
Adaplor (1 or 4, depending on ports)
Avilable in up to four port configurations 1o0
ProSoft Configuration Builder
receive and/or transmil data.
ProSoft Configuration Builder (PCB) provides a quick and easy way
Transmit and Receive
255 byles each
to manage module configuration files customized to meet your
bufer size
application needs. PCB is not only a powerful solution for new
Transmit character with
0 to 65535 mllisecond delay between each
configuration files, but also alws you to import information from
pacing
transmittled characler.
previously intalldl (known working) configurations to new projects.
General Specifications
Additional Products
The ProLinx Communication Modules provide cnnetivity for two or
ProSoft Technology ofers a full complement of hardware and
more dssimilar network types. The modules, encased in sturdy
sofware slutions for a wide variety of industrial communication
extruded aluminum, are stand-alone DIN-rail mounted protocol
platforms.
gateways, providing communication between many of the most
widely used procols in industrial automation today.
Visit our web site at htp://prosofp.t.chnology.co for a
complete list of products.
Hardware Specifications
Specification
De
ion
Ordering Information
Power Supply
24 VDC nominal
To order this product, please use the fllowing:
18 to 36 VDC alowed
5102-DFCM-ASCII3
DF1 Master/Slave to ASCII Generic Serial
Postitive, Negative, GND Terminals
Gateway
2.5 mm screwdriver blade
To place an order, please contact your local ProSoft Technology
Current Load
500 mA max@ 24 VDC
distributor. For a list of ProSoft dsributors near you, go to
Operating Temperalure
-2010 50°C (-4 to 122*F)
htp:///w.w porof-technology.com
Slorage Temperalure
-4010 85°C (- 40 to 185*F)
The coupling connecting the motor shaft and the equipment system deviates, and the mounting screws are not tightened; Poor engagement of pulleys or gears will also cause load torque changes. Test no-load operation. If it is normal during no-load operation, check whether the combination part of the mechanical system is abnormal; Recognize whether the load inertia, torque and speed are too large, and test the no-load operation. If the no-load operation is normal, reduce the load or replace the driver and motor with larger capacity. Application of Bently 3500 in steel, electric power, chemical and petrochemical industry and measuring points for vibration monitoring
