810-072907-052
810-072907-052产品描述GE DC电源连接板DS200PCCAG10ACB用作驱动器和SCR电源桥之间的接口。安装替换DS200PCCAG10ACB板后，
您可能有理由将驱动器的配置文件下载到笔记本电脑以供查看。您可以编辑配置文件并更改参数，以更新安装了更换板的驱动器的操作。
To replace the DS200PCCAG10ACB board, you must disconnect all power to the drive. To do that, access the 3-phase power supplies that provide current to the drive. Then, remove the fuses from the power supplies. Next, you can open the bay that contains the boards and remove the wires and connectors.
Frequently Asked Questions about DS200PCCAG10ACB
What does DS200PCCAG10ACB do for lower horsepower controllers?
For low-to-medium horsepower controllers, DS200PCCAG10ACB includes snubber circuits to control spikes across the AC lines, DC bus, and gate drivesr. For higher horsepower controllers, some or all of the snubber circuits are omitted from the DS200PCCAG10ACB board.
How many jumpers does DS200PCCAG10ACB have?
DS200PCCAG10ACB has four wire jumpers. DS200PCCAG10ACB's jumpers are JP1, JP2, WP3, and WP4. The jumpers on DS200PCCAG10ACB select system voltage and determine snubber capacitor connectors.
What type of snubbers does DS200PCCAG10ACB connect to?
Because DS200PCCAG10ACB is a G10 board group PCCA, DS200PCCAG10ACB only connects to DC snubbers.
