英国GRIMM格林进口齿轮泵产品简介：
英国GRIMM格林进口齿轮泵热线电话： 上海秉奇阀门有限公司销售英国GRIMM格林进口齿轮泵
进口齿轮泵系容积式泵，主、被动齿轮与泵体、左右泵盖组成进油、出油二个封闭空间，当齿轮转动时，进油腔的容积，由于啮合齿不断脱开，而由小变大形成真空，将液体吸入，有齿谷带往油腔，而出油腔容积，由于啮合齿的不断进入啮合而大变小，油液受压缩而被排出,从而达到输送油料的目的。
进口齿轮泵适用于输送不含固体颗粒和纤维，无腐蚀性，温度不高于80℃，粘度为5×10-6～1.5×10-3m2/s（5-1500cSt)的润滑油或性质类似润滑油的其他液体以及用于液压转动系统。
英国GRIMM格林进口齿轮泵概述：
英国GRIMM格林进口齿轮泵结构特点：
英国GRIMM格林进口齿轮泵主要参数：
英国GRIMM格林进口齿轮泵适用范围：
英国GRIMM格林进口齿轮泵性能应用领域：
UK GRIMM Import gear pump summary:
The import volume pump gear pump system, active and passive gear and the pump body, pump cover composition into the oil, oil two closed space, when the gear rotates, the volume into the oil chamber, the gear continuously disengaged, and from small to large to form a vacuum, sucking the liquid, a tooth to the oil cavity and the oil cavity volume, the meshing teeth meshing and continue to enter into small, oil is compressed and discharged, so as to achieve the purpose of conveying oil.
UK GRIMM Import gear pump structure characteristics:
Imported gear pump mainly by gear, shaft, pump body, pump cover, bearing sleeve, shaft end seal (special requirements, can use magnetic drive, zero leakage structure) and other components. The gears are treated by nitriding for higher hardness and wear resistance. The shaft is mounted in a replaceable axle sleeve. The lubrication of all parts in the pump is automatically reached when the pump is working.
Pump four bearings in the pump floating installation, with the size of the work pressure automatically adjust the end clearance, so the pressure of the pump is stable, the output flow of small fluctuations, high deposition efficiency.
From the spindle overhang to the pump, clockwise rotation.
UK GRIMM Import gear pump technical parameter:
Flow rate: 1.08-12m3/h
Discharge pressure: 2.5MPa
Caliber: 20-50mm
Required cavitation: 9.5m
Efficiency: 58-63%
Speed: 1420-1460r/min
Power: 2.2-15kw
Voltage: 220/380V
Material: cast iron, stainless steel
UK GRIMM Import gear pump scope of application:
The imported gear pump for conveying solid particles and fiber, non corrosive, temperature is not higher than 80 DEG C, the viscosity is 5 * 10-6 to 1.5 * 10-3m2/s (5-1500cSt) and other liquid lubricating oil or lubricating oil and properties similar to those used in hydraulic rotation system.
UK GRIMM Import gear pump application area:
It can be used as a booster pump in the oil transportation system;
A fuel pump used in a fuel system for transportation, pressurization, and injection;
A hydraulic pump used to provide hydraulic power in a hydraulic transmission system;
It can be used as lubricating oil pump in all industrial fields.
进口齿轮泵☞：http://www.021fmc.cn/aspcms/product/2017-7-18/2725.html
GRIMM：
上海秉奇阀门有限公司为GRIMM公司在的代理，是拥有GRIMM代理权及销售权，主要为地区客户提供服务与技术支持，同时，秉奇人员也积极参与部技术培训学，并不断掌握产品原理、实际运作、工程技术做为基石，完善对地区客户需求。
关于GRIMM：
英国格林（GRIMM）国际有限公司是亚太地区流体控制领域的主要生产和供应商，公司部位于克莱福德，拥有一支有经验的研发队伍，实行全球统一设计，统一标准，在水泵领域内处于地位。在许多个均有生产水泵基地，由上海秉奇阀门负责市场各项业务与技术支持中心，同时向市场销售。
英国格林（GRIMM）产品已广泛应用于市政给排水、建筑、石油、化工、液化气、食品、制药、发电、冶金、矿产、锅炉蒸汽系统、压力容器、原子能、航空、火箭等各领域，以及人们日常生活中。
英国格林（GRIMM）主要产品有：管道泵、离心泵、隔膜泵、磁力泵、真空泵、潜水泵、排污泵、计量泵、卫生级泵、罗茨风机等系列产品。
服务体系：
GRIMM品质：
GRIMM公司注重产品质量及使用寿命，全部采用制造技术和生产设备，并坚持不懈研发新产品，为确保不间断的全过程质量控制，在生产过程中采用(SPC)过程控制和(TQM)全面质量管理；GRIMM的严格规范实现了不让品质拖节，有效保障产品每个细节达到的性能指标。
GRIMM：
掌握核心的流体控制技术，提供市场的产品、服务和解决方案，帮助用户提高效率，带来至关重要的基础设施。
GRIMM服务：
我们与用户紧密合作，支持一系列系统使用技术和文件报告，提供售前、售中、售后服务和技术支持，有了您的信任与支持，我们将更完善、更高效提供水泵流体技术方案。
GRIMM china:
Shanghai Bingqi Valve Co., Ltd. for GRIMM company general agent in China, is China with GRIMM proxy and sales rights, provide service and technical support, mainly for Chinese customers at the same time, will also actively participate in the training of technical personnel of butterfly learning headquarters, and continue to grasp the product principle, practical operation and Engineering Technology
About GRIMM:
Uk GRIMM International Co., Lid is the field of fluid control in the Asia Pacific region is one of the main production and suppliers, the company headquarters is located in Clay Forde, has an experienced R & D team, the implementation of a global unified design, unified standards, a leading position in the field of water pump. In many countries, there are production pump
Uk GRIMM products have been widely used in various fields for municipal drainage, construction, petroleum, chemical, gas, food, pharmaceutical, power generation,
Uk GRIMM the main products are: pipeline pump, centrifugal pump, diaphragm pump, magnetic pump, vacuum pump, submersible pumps, sewage pumps, metering pumps, sanitary pump, blower and other products.
Service system:
GRIMM quality:
GRIMM company pays attention to product quality and service life, all adopt the advanced manufacturing technology and production equipment, and unremittingly research and development of new products, the whole process of quality control to ensure uninterrupted, used in the production process (SPC) process control (TQM) and total quality management; strictly regulate the implementation of GRIMM has not let the quality drag day, effectively guarantee the performance of each product details.
GRIMM major:
Fluid control technology master core, market leading products, services and solutions that help users improve efficiency, bring critical infrastructure.
GRIMM service:
We work closely with the user, support a series of system using technology and file reports provide pre-sale, sale, customer service and technical support services, with your trust and support, we will be more perfect and more efficient to provide technical solutions of fluid pump.
英国格林代理商：上海秉奇阀门有限公司，微信咨询：
Uk GRIMM total agents: Shanghai Bingqi Valve Co., Ltd., WeChat Advisory:
Welcome new and old customers call negotiate!
Contacts：Huang Tianxiang
QQ：673088832
Mobile Phone: (微信同号）
Company Phone:
Add:Lane 51, dragon road, Shanghai, Xuhui District
进口齿轮泵系容积式泵，主、被动齿轮与泵体、左右泵盖组成进油、出油二个封闭空间，当齿轮转动时，进油腔的容积，由于啮合齿不断脱开，而由小变大形成真空，将液体吸入，有齿谷带往油腔，而出油腔容积，由于啮合齿的不断进入啮合而大变小，油液受压缩而被排出,从而达到输送油料的目的。
进口齿轮泵主要由齿轮、轴、泵体、泵盖、轴承套、轴端密封(特殊要求，可选用磁力驱动，零泄露结构)等组成。齿轮经氮化处理有较高的硬度和耐磨性。与轴一同安装在可更换的轴套内运转。泵内全部零件的润滑均在泵工作时利用输送介质而自动达到。
泵内四个轴承套在泵内浮动安装，随工作压力大小自动调整端面间隙，因此泵的压力稳定，输出流量脉动小，溶积效率高。
从主轴外伸端向泵看，为顺时针旋转。
流 量：1.08-12m3/h
排 出 压 力：2.5MPa
口 径：20-50mm
必需汽蚀余量：9.5m
效 率：58-63%
转 速：1420-1460r/min
功 率：2.2-15kw
电 压：220/380V
材 质：铸铁、不锈钢
进口齿轮泵适用于输送不含固体颗粒和纤维，无腐蚀性，温度不高于80℃，粘度为5×10-6～1.5×10-3m2/s（5-1500cSt)的润滑油或性质类似润滑油的其他液体以及用于液压转动系统。
在输油系统中可用作传输，增压泵；
在燃油系统中可用作输送、加压、喷射的燃油泵；
在液压传动系统中可用作提供液压动力的液压泵；
在一切工业领域中，均可作润滑油泵用。
电话:
手机:
传真:
地址:上海市徐汇区龙漕路51弄
邮编:200235
Email:bqvalves@126.com
网址:http://www.021fmc.cn
http://bqvalves.testmart.cn
