| Feature |  | | Safety Approval： |  |
|
| |
Standard Size in 1.97 x 1.0 x 0.425 inches
Nickel-Coated Copper with Non-conductive Base Six-side Shielded
Operating Temperature: -25~70 degrees
Package: Module Screw Terminal
2:1 & 4:1 Wide Input Range
Regulated Output
Low Ripple and Noise
Remote ON/OFF Control (Optional)
Screw Terminal For Optional
Safety approval by CE and UL
| |
 download SPC. |
| Specification |
| | 1.All specificationsvalid at nominal input voltagefull load and +25°Cafter warm-up time
unless otherwise stated.
2.Measured with 0.1U 50V // 47U 50V Ceramic Cap. Cross to output |
| | Input Specification | |
| | Characteristics | Conditions | |
| | Voltage Range | 2:1 Range: | 9 ~ 18 VDC
18 ~ 36 VDC
36 ~ 75 VDC | |
| | 4:1 Range: | 10 ~ 40 VDC
18 ~ 75 VDC | |
| | Filter |  type
| |
| | | | | | |
| | Output Specification | |
| | Characteristics | Conditions | |
| | Output Power | 10 Watt (max.) | |
| | Voltage Accuracy
(Full Load and Nominal Vin) | Single: | ±2% | |
| | Dual: | ±2% | |
| | | | |
| | Minimum Load (at Full Load) | 0% to 3% | |
| | Line Regulation
(LL to HL at Full Load) | Single: | ±0.5% | (typ.) | |
| | Dual: | ±0.5% | |
| | | | |
| | Load Regulation
(10% to at Full Load)
| Single: | ±1% | (typ.) | |
| | Dual: | ±1% | |
| | | | |
| | Ripple (20MHz bandwidth) | <0.2% Vout+40mV | (max.) | |
| | | |
| | Noise (20MHz bandwidth) | <0.5% Vout+50mV | (max.) | |
| | | |
| | Temperature Coefficient | ±0.02% / °C (max.) | |
| | Short Circuit Protection | Current limit Auto-recovery | |
| | | | | | |
| | General Specification | |
| | Characteristics | Conditions | |
| | Switching Frequency | 300K Hz (typ.) | |
| | Isolation Voltage (Input to Output) | 1600 VDC (min.) | |
| | Operating Temperature | -25 ℃ to +70 °C (2:1 Range:at Full Load / 4:1 Range:with derating) | |
| | Storage Temperature | -55°C to +105°C | |
| | Humidity | 95% RH (max.) | |
| | Cooling | Free air convection | |
| | | | | | |
| | Physical Specification | |
| | Characteristics | Conditions | |
| | Dimension (Tolerance ±0.5) | 50.1 x 25.4 x 10.8 mm | |
| | 1.97 x 1.0 x 0.425 inches | |
| | Weight | 32 g | |
| | Case Material | Nickel-Coated Copper with Non-conductive Base Six-side Shielded | |
| | | | | | |
