OMAL双气动执行器现场安装|OMAL
1）每个单独的OMAL执行器都是自己精心控制的来自制造商的完整性和功能，几个简单的步骤将长期保持运作。
2）仔细阅读安装并使用说明手册提供OMAL执行器和这些补充说明用于潜在爆炸性环境中，然后再进行对任何操作。
3）验证收到的产品是否完全匹配由其要安装的应用程序的性能所要求的
4）检查包装在接收时是否完好无损由运输过程中发生的碰撞或跌倒造成的损坏。
5）如果OMAL执行器需要长时间存放，好不要将其从保护性包装中取出;为它储存选择干净的地方，不要过度潮湿-10〜+ 60℃
营销分类
1）OMAL执行器主体上的名称用激光打标标记和制造商的地址，OMAL执行器型号，信息相对于适用的小和大先导压力以及允许使用的环境温度限制的执行器本身。
2）始终通过激光打标或附加标签（取决于OMAL执行器型号），数据相关用于潜在爆炸性环境的信息。LEGEND
1-营销经理的标记和地址
现场E.U.
2-设备型号和生产年份/ N.批量装置（注*）
3-遵守等级按照规定和保护等级“c”，TX温度等级和特殊条件X.
4-通知机构提交的技术文件的名称注*序列号，每年的批号代表识别的数字均匀的产品批次，让您跟踪备份的ATEX合规性检查，已注册和提交生产者。
纵横国内外双气动执行器的很多，有EBRO,OMAL,PROPORTION-AIR等，但是重点下意大利OMAL欧玛尔，OMAL是做阀门的，一直给钢铁行业不遗余力的供货，满足钢铁行业管道的应用。
OMAL不锈钢双气动执行器口径分别是：DA30 DA45 DA60 DA90 DA120 DA240 DA360 DA720 DA960这几种口径
OMAL不锈钢双气动执行器可以配OMAL电磁阀，OMAL球阀，OMAL蝶阀使用，不同的阀体分别配有不同的安装地板，订货时可以配套。
DA015516S DA030516S
KGXI0112 KGXI0114
DA060516S DA120516S DA240516S DA480516S
KGXI0116 KGXI0118 KGXI0120 KGXI0122
我司所有销售的OMAL产品，都是由意大利OMAL厂家原厂订货，报关，原装，货期，产品都是可以得到包装的，如有需求，请联系：
OMAL负责人： 电话: QQ:3517688229
OMAL双气动执行器现场安装|OMAL
OMAL不锈钢双动气动执行器性能与优点
滑动部件之间配有无油润滑轴承和导向环 减少活塞与气缸的摩擦
避免密封圈与气缸的粘连，即使长时间不用也不会发生
插槽、阀套和拨叉都是不锈钢的，硬度过50HRC 能有较抵抗执行器内在的动力磨损
插槽与活塞间是滚动摩擦 减少了摩擦
销轴的滚动摩擦使活塞与轴承间的直线运动变成圆周运动而无需齿轮 减少了活塞与轴承间的摩擦，也因此减少了零部件的损耗
增强了阀门开启与关闭过程的扭矩
与有齿轮齿条相比，减少了执行器体积，也减少了安装的空间
与有齿轮齿条相比，减少了自重（-30%），也缩小了设备的结构
与有齿轮齿条相比，减少了空气的消耗（双动型：-40%cm3/Nm；单动型：-20%cm 3/Nm），同时也减轻了压缩机的工作量，使选用较小规格的压缩机有了可能
OMAL圆筒形气缸 由于表面低粗糙度（0.12微Ra），减少了活塞滑动部件的磨损
整个生产过程都在OMAL欧玛尔公司的跟踪之中 对每一道生产工艺实施严格的监控
防爆标准（ATEX）资质证书 允许产品在有潜在爆炸危险的环境安装
OMAL不锈钢双动气动执行器安全完整性等级SIL 3 资质证书 保证设备运行高度可靠安全
OMAL双气动执行器现场安装|OMAL
OMAL不锈钢双动气动执行器技术参数
OMAL不锈钢双动气动执行器扭矩：从15 Nm. 至 480 Nm。
法兰连接标准：DIN/ISO 5211 DIN 3337; F03 - F05 - F07 - F10。
附件连接要求：VDI/VDE 3845。
旋转角：90°
扭矩：直接与气源压力成正比；参考产品目录双动气动DA执行器参数表。
每种执行器DA编号后的数字，对应5.6 bar压力下的阀门起步扭矩。
从尺寸为DA60起，可以直接在执行器上安装NAMUR电磁阀。而尺寸为DA15至DA30，仍需NAMUR连接件。
防爆型ATEX执行器符合欧盟2014-34-EU标准。防爆型（ATEX）产品编号须在尾部加上YX字母工作条件
OMAL不锈钢双动气动执行器温度：从-20°C至+80°C。
气源压力：5.6 bar；大工作压力：8.4 bar。
气源供应：经过滤干燥的压缩空气，无须湿润。
在湿润情况下，使用不含清洁剂的油类，或适合氟橡胶（NBR）的油类
DA015516S DA030516S
KGXI0112 KGXI0114
DA060516S DA120516S DA240516S DA480516S
KGXI0116 KGXI0118 KGXI0120 KGXI0122
OMAL SALES TERMS AND CONDITIONS
OVERVIEW
· The present general Terms and Conditions are applied to all the supplies of goods and the provisions
of services entered into by OMAL. They fully replace any document, even the preliminary ones, that
has been mentioned or produced by third parties, which cover technical aspects, supply conditions,
delivery terms, liability and guarantee regarding single or assemblies products produced or resold by
OMAL.
· Product characteristics and performances, OMAL is bound to, are those specified in the technical
documentation attached to the OMAL offer or to the general catalogue for Standard products. The
performances listed in the chart refer to a single product and they may be depend on and limited by
the system configuration or on the solutions explicitly adopted by the person that carries out the
engineering and/or assembly, unless such solutions have been expressly accepted by OMAL.
· If the customer accepts, by the contract, the supply of products that are not manufactured by OMAL
Spa, then the same customer explicitly accepts OMAL’s limited warranty and liability.
· If specified by contract terms, OMAL’s products are supplied together with a declaration of conformity
to the order or a control statement according to the EN 10204:2004 standard.
1. THE CONTRACT
1.1 All orders must be transmitted in written form and they are subject to the present Sales Terms and
Conditions; unless otherwise it is agreed upon between the parties in written form, any other terms and
conditions issued by the costumer and any other statement, declaration, condition or warranty not
included in the offer and in the order confirmation shall not be binding upon OMAL Spa.
1.2 OMAL Spa reserves the right to modify and/or change the present Sales Terms and Conditions, by
attaching such changes and variations to the offer or by written notice to the customer, provided it is to
be prior to the order confirmation date. The customer may withdraw from the contract or cancel the
order failing to accept OMAL’s changes and variations; it’s provided that such withdrawal is notified to
OMAL Spa, in written form, within 10 days from the date in which the customer has been informed of
such changes and variations.
1.3 The Customer has the right to cancel the order within two days from the date of the confirmation
order by OMAL Spa. When the Customer cancels the order or refuses the delivery of the products ordered
after that date, He must pay a penalty equal to 33% of the entire value of the confirmed order, without
prejudice to any other damages.
1.4 Unless otherwise specified in the contract, the delivery of the goods shall be made Ex-Works -
Incoterms ® 2010
