深圳市鑫博恒业科技有限公司
地址：深圳市福田区华强北都会大厦B座27楼S室
电话：
http://www.xb5j.com E-mail:info@xb5j.cn
QQ: 800062763
CN243-R1-R2-F3
温度过程控制器 ? 1/32和1/16 DIN自动调谐控制器 ? CN243-R1-F2
1/16 DIN Temperature Process Controller Including Thermistor Inputs
CN243-R1-F2
Dual Display
J, K, R, S Thermocouple Inputs
Process Inputs
RTD and Thermistor Inputs
Alarm Functions
On/Off or PID control
3 Step Ramp Soak Feature
Autotune
Digital Input
Password Protection
24 to 230 Vac/Vdc
Optional RS485
Optional Software with Configuration Module
Optional Heater Loop Break Alarm
产品描述
Temperature Controller with Thermistor Inputs that allows you to monitor and control temperature or process applications with precision. The CN243 Series provides dual LED displays for local indication of process value and setpoint value. Control methods include on/off, PID, auto-tune and manual-tune. Controller includes a 3-setpoint ramp/soak control feature, alarm functions with optional RS485 communications heater loop break alarm. Analog output can be programmed for either control or retransmission of process variable. An optional software package CN-SW-HW-KIT includes cable and configuration module for quick configuration of units, as well as copying configuration parameters from one unit to another. The configuration module can also be purchased separately and with a built-in battery feature, configuration settings can be downloaded and copied to the module without power applied to controller. The module can then be plugged into a new unit without power applied and the configuration setting can be transferred for easy set-up for multiple units.
Specifications
Front Panel Bezel: 48 x 48 mm (1.89 x 1.89")
Panel Depth: 125 mm (4.9")
Supply Voltage: 24 to 230 Vac/Vdc ±15%, 50/60 Hz
Power Consumption: 5 W
Display: Two 4-digit, 10 mm (0.4") green (SV), 8 mm (0.3") red (PV)
Accuracy: ±0.5°C temperature, 0.2% reading
Resolution: 1°/0.1° 10 μV process
A/D Conversion: Sigma-delta
Reading Rate: Programmable
Digital Filter: Programmable
Operating Conditions:
Temperature: 0 to 45°C (32 to 113°F)
Humidity: 35 to 95 RH%
Material:
Enclosure: Noryl UL94V1, self-extinguishing
Front Panel: PC ABS UL94V0, self-extinguishing
Weight: 165 g (3.95 oz)
Front Panel: IP65 (with gasket), box IP30, terminal blocks IP20
Inputs:
Thermocouple: J, K, R, S
RTD: Pt100, Pt500, Pt1000, Ni100
Thermistor: PTC1K, NTC10K (B 3435K), NTC 2252 Ω
Process: 4 to 20 mA, 0 to 10V, 0 to 40 mV, potentiometer 0 to 6/160 KΩ
Sampling Time: 4,1 ms (frequency 242 Hz)
1 Digital Input: Up to 4 setpoint selections, hold, run, tuning launch, start/stop cycle
Outputs:
2 or 3 Relays: 5 A to 250 Vac (resistive)
DC Pulse: 12 Vdc, 30 mA
Analog: Programmable for 4 to 20 mA, 0 to 10 Vdc, control or retransmission
Serial Communication: RS485 Modbus ? RTU
Control Algorithms: On/off with hysteresis, P, PI, PID, PD, time proportional
Tuning: Manual or autotune
Data Protection: Lock of command/ alarm setpoint, access to parameters by password
Alarm Modes: Absolute/threshold, band, high/low deviation; alarm with optional manual reset
Soft-Start: Rising gradient expressed as °C or °F/hour
Programmer Function: Start/stop, 3 steps pre-programmed cycle
Timer Function: Controller function + single/double timer
产品编号 产品描述
CN243-R1-F2 Controller, relay/relay or relay/dc Pulse or analog output (selectable for output 2)
CN243-R1-R2-F3 Controller, relay/relay/dc Pulse or analog output (selectable for output 3), heater loop break
CN243-R1-R2-R3-F4-C4 Controller, relay/relay/relay/dc Pulse or analog output (selectable for output 4), RS485, heater loop break
Accessories
CN-SW-HW-KIT cable and configuration module kit
CN-CONFIG-MODULE memory plug in module
CNQUENCHARC suppression kit, 110 to 230 Vac
CN243-R1-R2-F3
CN243-R1-R2-F3
