西门子NCU控制主板6FC5357-0BA24-0AE0-上海昊征自动化科技有限公司

西门子NCU控制主板6FC5357-0BA24-0AE0西门子NCU控制主板6FC5357-0BA24-0AE0

¹⁾ The rated output current I_rated and the -load current I_L are d on the duty cycle for low overload (LO).

²⁾ The -load current I_H is d on the duty cycle for high overload (HO).

³⁾ Typical values. You can find more information on the Internet at https://support.industry.siemens.com/cs/document/94059311

⁴⁾ The input current depends on the motor load and line impedance and applies for a line impedance corresponding to u_K = 1 %. The rated input currents apply for a load at rated power (d on I_rated) – these current values are specified on the rating plate.

⁵⁾ Max. motor cable length 25 m (82 ft) (shielded) for PM230 Power Modules with integrated line filter to maintain the limit values acc. to EN 61800‑3 Category C2. With unshielded cables, Category C2 is not achieved.

上海昊征自动化科技有限公司本着“以人为本、科技先导、顾客满意、持续改进”的工作方针，致力于工业自动化控制领域的产品开发、工程配套和系统集成，拥有丰富的自动化产品的应用和实践经验以及雄厚的技术力量，尤其以PLC复杂控制系统、传动技术应用、伺服控制系统、数控备品备件、人机界面及网络/软件应用为公司的技术特长。几年来，上海昊征自动化科技有限公司与德国SIEMENS公司自动化与驱动部门的长期紧密合作过程中，建立了良好的相互协作关系，在可编程控制器、交直流传动装置方面的业务逐年成倍增长，为广大用户提供了SIEMENS的新技术及自动控制的解决方案。

上海昊征自动化科技有限公司

联系人：颜江

手机：

电话：

传真：

Q Q：455499155

企业邮箱：xmz169@qq.com

上海昊征自动化科技有限公司在经营活动中精益求精，具备如下业务优势：

1、模块化控制器SIMATIC S7系列（S7-1200、S7-1500、S7-200、S7-200CN 、S7-200 SMART、S7-300、S7-400）、分布式I/O-SIMATIC ET 200。

2、西门子HMI操作设备及SCADA系统：TP177B面板、OP177B面板、MP177操作面板、OP277面板、MP377操作面板、KP300PN面板、KTP400PN面板、KP400PN彩色面板、KTP600PN面板、KTP600DP面板、KTP1000PN面板、KTP1000DP面板、 TP1500PN面板

3、西门子变频器。

4、西门子SITOP电源。

5、西门子CNC系统和CNC控制器-SINUMERIK数控系统(SINUMERIK840D、SINUMERIK802S/C、SINUMERIK802SL、SINUMERIK828D SINUMERIK801D 、SINUMERIK828 、SINUMERIK808 、SINUMERIK840)。

6、伺服变频器数控V20/V90/V80V60。

7、西门子3RW软启动。

8、西门子停产备件。

9、仪表和传感器等各系列产品。

上海昊征自动化科技有限公司凭借雄厚的技术实力及多年从事 SIEMENS 产品的销售经验，本着树立公司形象和对用户认真负责的精神开展业务，赢得了SIEMENS 公司与广大用户的好评及大力支持。

【售后服务】：罚十，合同保证。

【产品质量】：质保保证，全新原装。

【产品价格】：价格优势，现货销售。

PM230 Power Modules degree of protection IP20 Push Through variant

Line voltage 380 ... 480 V 3 AC		PM230 Power Modules degree of protection IP20 Push Through variant
Without integrated line filter		6SL3211-1NE17-7UG1	6SL3211-1NE21-8UG1	6SL3211-1NE23-8UG1
With integrated line filter class A		6SL3211-1NE17-7AG1	6SL3211-1NE21-8AG1	6SL3211-1NE23-8AG1
Output current at 50 Hz 400 V 3 AC
Rated current I_rated¹⁾	A	7.7	18	38
Base-load currentI_L¹⁾	A	7.7	18	38
Base-load currentI_H²⁾	A	5.9	13.2	32
Maximum currentI_max	A	11.8	27	64
Rated power
Based on I_L	kW	3	7.5	18.5
Based on I_H	kW	2.2	5.5	15
Rated pulse frequency	kHz	4	4	4
Efficiency η	%	96	97	98
Power loss ³⁾ at rated current	kW	0.102	0.224	0.423
Cooling air requirement	m³/s (ft³/s)	0.005 (0.2)	0.009 (0.3)	0.019 (0.7)
Sound pressure level L_pA (1 m)	dB	<56	<62	<65
24 V DC power supply for Control Unit	A	1	1	1
Input current ⁴⁾
Rated current	A	8	19	39
Based on I_H	A	6.1	14	33
Line supply connection U1/L1, V1/L2, W1/L3		Screw-type terminals, plug-in	Screw-type terminals, plug-in	Screw-type terminals, plug-in
Conductor cross-section	mm²	1.5 ... 2.5	4 ... 6	6 ... 16
Motor connection U2, V2, W2		Screw-type terminals, plug-in	Screw-type terminals, plug-in	Screw-type terminals, plug-in
Conductor cross-section	mm²	1 ... 2.5	4 ... 6	10 ... 16
Motor cable length, max. ⁵⁾
Shielded	m (ft)	25 (82)	25 (82)	25 (82)
Unshielded	m (ft)	100 (328)	100 (328)	100 (328)
Degree of protection		IP20	IP20	IP20
Dimensions
Width	mm (in)	126 (4.96)	154 (6.06)	200 (7.87)
Height	mm (in)	238 (9.37)	345 (13.58)	411 (16.18)
Depth
Without operator panel	mm (in)	171 (6.73)	171 (6.73)	171 (6.73)
With operator panel, max.	mm (in)	251 (9.88)	251 (9.88)	251 (9.88)
Frame size		FSA	FSB	FSC
Weight, approx. With integrated line filter
Without integrated line filter	kg (lb)	1.7 (3.75)	3.4 (7.50)	5.4 (11.91)
With integrated line filter	kg (lb)	1.9 (4.19)	3.6 (7.94)	6 (13.23)

¹⁾ The rated output current I_rated and the -load current I_L are d on the duty cycle for low overload (LO).

²⁾ The -load current I_H is d on the duty cycle for high overload (HO).

³⁾ Typical values. You can find more information on the Internet at https://support.industry.siemens.com/cs/document/94059311

Characteristic curves

Derating data

Pulse frequency

Rated power ¹⁾		Rated output current in A for a pulse frequency of
400 V	460 V	Rated output current in A for a pulse frequency of
kW	hp	4 kHz	6 kHz	8 kHz	10 kHz	12 kHz	14 kHz	16 kHz
0.37	0.5	1.3	1.11	0.91	0.78	0.65	0.59	0.52
0.55	0.5	1.7	1.45	1.19	1.02	0.85	0.77	0.68
0.75	0.75	2.2	1.87	1.54	1.32	1.1	0.99	0.88
1.1	1	3.1	2.64	2.17	1.86	1.55	1.4	1.24
1.5	2	4.1	3.49	2.87	2.46	2.05	1.85	1.64
2.2	3	5.9	5.02	4.13	3.54	2.95	2.66	2.36
3	3	7.7	6.55	5.39	4.62	3.85	3.47	3.08
4	5	10.2	8.67	7.14	6.12	5.1	4.59	4.08
5.5	7.5	13.2	11.22	9.24	7.92	6.6	5.94	5.28
7.5	10	18	15.3	12.6	10.8	9	8.1	7.2
11	15	26	22.1	18.2	15.6	13	11.7	10.4
15	15	32	27.2	22.4	19.2	16	14.4	12.8
18.5	20	38	32.3	26.6	22.8	19	17.1	15.2
22	25	45	38.25	31.5	27	22.5	20.25	18
30	30	60	51	42	36	30	27	24
37	40	75	63.75	52.5	45	37.5	33.75	30
45	50	90	76.5	63	54	45	40.5	36
55	60	110	93.5	77	66 ²⁾	55 ²⁾	49.5 ²⁾	44 ²⁾
75	75	145	123.3	101.5	–	–	–	–
90	100	178	151.3	124.6	–	–	–	–

¹⁾ Rated power d on the rated output current I_rated. The rated output current I_rated is d on the duty cycle for low overload (LO).

²⁾ Values apply only to IP20 variants.

Ambient temperature

Permissible output current as a function of the ambient temperature for low overload (LO) for PM230 Power Modules, sizes FSA to FSC

Permissible output current as a function of ambient temperature for low overload (LO) for PM230 Power Modules, sizes FSD to FSF

Permissible output current as a function of ambient temperature for high overload (HO) PM230 Power Modules, sizes FSA to FSC

Permissible output current as a function of ambient temperature for high overload (HO) PM230 Power Modules, sizes FSD to FSF

Note:

The operating temperature ranges of the Control Units should be taken into account. The temperature ranges are specified in the section Technical specifications under Control Units.

Installation altitude

Permissible line supplies as a function of the installation altitude

Installation altitude up to 2000 m (6562 ft) above sea level
- Connection to every supply system permitted for the inverter
Installation altitudes between 2000 m (6562 ft) and 4000 m (13124 ft) above sea level
- Connection to a TN system with grounded neutral point
- TN systems with grounded line conductor are not permitted
- The TN line system with grounded neutral point can also be supplied using an isolation transformer
- The phase-to-phase voltage does not have to be reduced

Note:

The connected motors, power elements and components must be considered separately.

Permissible output current as a function of the installation altitude for PM230 Power Modules, sizes FSA to FSF

System operating voltage

Permissible output current as a function of the line voltage for PM230 Power Modules, sizes FSA to FSF

Permissible rated power as a function of the line voltage for PM230 Power Modules, sizes FSA to FSF

Dimensional drawings

PM230 Power Modules, degree of protection IP55

Principle dimension drawing and drill pattern for PM230 Power Modules, degree of protection IP55, with integrated line filter class A/B

Frame size	Dimensions in mm (inches)			Drilling dimensions in mm (inches)			Cooling clearance in mm (inches)			Mounting
	a (width)	b (height)	c (depth)¹⁾	d	e	f	top	bottom	side	With bolts, nuts and washers
PM230 Power Modules, degree of protection IP55 with integrated line filter class A/B
FSA	154 (6.06)	460 (18.11)	249 (9.8)	132 (5.19)	445 (17.51)	11 (0.43)	100 (3.94)	0 (0)	0 (0)	4 × M4
FSB	180 (7.08)	540 (21.25)	249 (9.8)	158 (5.9)	524 (20.62)	11 (0.43)	100 (3.94)	0 (0)	0 (0)	4 × M4
FSC	230 (9.05)	620 (24.4)	249 (9.8)	208 (8.18)	604 (23.77)	11 (0.43)	125 (4.92)	0 (0)	0 (0)	4 × M5
FSD	320 (12.59)	640 (25.19)	329 (12.95)	285 (11.22)	600 (23.62)	17.5 (0.69)	300 (11.81)	0 (0)	50 (1.97) ²⁾	4 × M8
FSE	320 (12.59)	751 (29.56)	329 (12.95)	285 (11.22)	710 (27.95)	17.5 (0.69)	300 (11.81)	0 (0)	50 (1.97) ²⁾	4 × M8
FSF	410 (16.14)	915 (36.02)	416 (16.38)	370 (14.56)	870 (34.25)	20 (0.79)	350 (13.78)	0 (0)	50 (1.97) ²⁾	4 × M8

¹⁾ Increased depth:

• When the IOP is plugged on, the depth increases by 17 mm (0.67 in)

• When the BOP‑2/blanking cover is plugged on, the depth increases by 7 mm (0.28 in)

²⁾ Up to 40 °C (104 °F) without any lateral clearance.

PM230 Power Modules, degree of protection IP20, Standard variant

Principle dimension drawing and drill pattern for PM230 Power Modules, degree of protection IP20, Standard variant, with/without integrated line filter class A

Frame size	Dimensions in mm (inches)			Drilling dimensions in mm (inches)			Cooling clearance in mm (inches)			Mounting
	a (width)	b (height)	c (depth)¹⁾	d	e	f	top	bottom	side²⁾	With bolts
PM230 Power Modules, degree of protection IP20, Standard variant, with/without integrated line filter class A
FSA	73 (2.87)	196 (7.72)	165 (6.5)	62.3 (2.45)	186 (7.32)	6 (0.24)	80 (3.15)	100 (3.94)	0 (0)	3 × M4
FSB	100 (3.94)	292 (11.5)	165 (6.5)	80 (3.15)	281 (11.06)	6 (0.24)	80 (3.15)	100 (3.94)	0 (0)	4 × M4
FSC	140 (5.51)	355 (13.98)	165 (6.5)	120 (4.72)	343 (13.5)	6 (0.24)	80 (3.15)	100 (3.94)	0 (0)	4 × M5
FSD	275 (10.83)	419/512 (16.50/20.16)	204 (8.03)	235 (9.25)	325/419 (12.8/16.5)	11 (0.43)	300 (11.81)	300 (11.81)	0 (0)	4 x M6
FSE	275 (10.83)	499/635 (19.65/25)	204 (8.03)	235 (9.25)	405/541 (15.94/21.3)	11 (0.43)	300 (11.81)	300 (11.81)	0 (0)	4 x M6
FSF	350 (13.78)	634/934 (24.96/36.77)	316 (12.44)	300 (11.81)	598/899 (23.54/35.39)	11 (0.43)	350 (13.78)	350 (13.78)	0 (0)	4 × M8

¹⁾ Increased depth:

• When the CU230P-2 Control Unit is plugged on, the depth increases by 58 mm (2.28 in) for FSA to FSC and by 49 mm (1.93 in) for FSD to FSF

• When the IOP is plugged on, the depth increases by a further 22 mm (0.87 in)

• When the BOP‑2 is plugged on, the depth increases by a further 12 mm (0.47 in)

²⁾The Power Modules can be mounted side by side. A side clearance of 1 mm (0.04 in) is recommended for tolerance-related reasons.

PM230 Power Modules, degree of protection IP20, Push Through variant

Principle dimension drawing and drill pattern for PM230 Power Modules, degree of protection IP20, Push Through variant, with/without integrated line filter class A

Frame size	Dimensions in mm (inches)			Drilling dimensions in mm (inches)			Section of cabinet in mm (inches)		Cooling clearance in mm (inches)			Mounting
	a (width)	b (height)	c (depth)¹⁾	d	e	f	g (width)	h (height)	top	bottom	side²⁾	With bolts
PM230 Power Modules, degree of protection IP20, Push Through variant, with/without integrated line filter class A
FSA	125.9 (4.96)	238 (9.37)	171 (6.73)	106 (4.17)	103 (4.06)	27 (1.06)	88 (3.46)	198 (7.8)	80 (3.15)	100 (3.94)	0 (0)	M5
FSB	153.9 (6.06)	345 (13.58)	171 (6.73)	134 (5.28)	147.5 (5.81)	34.5 (1.36)	116 (4.57)	304 (11.97)	80 (3.15)	100 (3.94)	0 (0)	M5
FSC	200 (7.87)	410.5 (16.16)	171 (6.73)	174 (6.85)	123 (4.84)	30.5 (1.2)	156 (6.14)	365 (14.37)	80 (3.15)	100 (3.94)	0 (0)	M5

¹⁾ Overall depth, of which 117.7 mm (4.63 in) is inside and 53.1 mm (2.09 in) is outside the control cabinet.

Increased depth:

• When the CU230P‑2 Control Unit is plugged on, the depth increases by 58 mm (2.28 in)

• When the IOP is plugged on, the depth increases by a further 22 mm (0.87 in)

• When the BOP‑2 is plugged on, the depth increases by a further 12 mm (0.47 in)

²⁾The Power Modules can be mounted side by side (mounting to mounting ). A side clearance of 1 mm (0.04 in) is recommended for tolerance-related reasons.

西门子NCU控制主板6FC5357-0BA24-0AE0西门子NCU控制主板6FC5357-0BA24-0AE0西门子NCU控制主板6FC5357-0BA24-0AE0西门子NCU控制主板6FC5357-0BA24-0AE0西门子NCU控制主板6FC5357-0BA24-0AE0西门子NCU控制主板6FC5357-0BA24-0AE0

西门子NCU控制主板6FC5357-0BA24-0AE0