深圳市鑫博恒业科技有限公司
地址：深圳市福田区华强北都会大厦B座27楼S室
电话：
http://www.xb5j.com E-mail:info@xb5j.cn
QQ: 800062763
DPF403-AR
速率计/累加器/批量计
DPF400
速率计/累加器/批量计
5年保修
率和的同时
批量控制器
实时时钟
平方根权证
孤立的BCD码的选择
5集电极开路输出标准
红色或绿色显示
该dpf400系列是一个完整的流量指标，以经济的价格提供的性能。单独的模型可用于流量和累计（带或不带平方根提取）批量控制。
该dpf400是前面板可编程为任何规模的输入范围中所需的工程单位显示。率和允许在不同的单位速率指示和累计规模的独立因素，如流量率和桶。如果安装了可选的RS-232或RS-485通信，单位也可以通过远程计算机编程。
该dpf400是提供4种输入类型，包括TTL /集电极开路脉冲，低水平的频率，模拟电压或电流模拟。单位可以由用户配置为三个功能：
一个转速表/测量/计量器
一个转速表/积算仪/配料与平方根提取（差压流量测量）
一批控制器只与多重批计数，自动/手动间歇循环，和远程或本地的停止/继续控制（起动控制可与用户提供的与控制继电器系列开关获得）
选择的dpf400包括模拟和BCD码输出，报警/控制输出，和RS-232或RS-485通信。
RS-232或RS-485通信选项是双向的，允许用户配置dpf400以及读取电流值。
虽然每个dpf400标配5集电极开路输出，可选的dp40-r板提供双7a机械继电器代替两个集电极开路报警，为2 7a继电器和三的集电极开路报警。
规格：
TTL Level Inputs (DPF401): 0.7 to 2.0 V threshold; 0.2 Hz to 20 kHz frequency; 24 V protection, positive trigger slope; 16 to 30 V unregulated 75 mA sensor excitation
Isolated Pulse Input with Excitation(DPF402): 60 Vrms with protection to 240 V max signal
Excitation Hysteresis Sensitivity
DPF402 5 V 13 mV 30 mV
Low 8.2 V 22 mV 50 mV
Level 2.4 V 35 mV 60 mV
NPN Open Collector Input (DPF402): 3-wire connection; 12 V regulated excitation
NAMUR Input (DPF402): 2-wire connection; 8.2 V excitation; 1 kohm impedance; <1 mA activated, >3 mA deactivated
Contact Closure Input (DPF402): 2-wire connection; 12 V regulated sensor excitation, 10 on/off per second frequency range
Analog Input (DPF403): 0 to 5 V, 1 to 5 V, or 4 to 20 mA range; 0 to 10 V, or 0 to 1 mA inputs optionally available; 354 Vp isolation; programmable low-level shutoff; 0.02% FS non-linearity; 0.05% FS accuracy; accuracy, 50 ppm/°C temperature coefficient, maximum
Display: 6-digit, 14-segment LED, red or green; 13.8 mm H (0.54"); indicator lights for alarms and status modes
Display Update: 0.04 to 3 seconds, programmable.
Min. Input Frequency: 0.2 Hz
Power: 115 std., 230 Vac opt. 50/60 Hz; 10 Watts maximum
Accuracy: Frequency: 0.01% of reading; Analog: 0.05% of full scale
Step Response: Analog: 50 msec for 10 to 90% FS; Frequency: equal to selected gate time
Operating Ambient Range: 0 to 50°C (32 to 122°F), 95% RH, non-condensing
Storage Temperature: -40 to 85°C (-40 to 185°F)
RS-232 Communications (optional): Front panel programmable for 300/1200/2400/4800/9600/19.2k baud; RJ11 4-wire connection; complete program setup and message display capability; programmable to transmit all measured values, alarm status, actual measured input value (not scaled) and status on programmable intervals from 1 to 60,000 seconds.
RS-485 Communications (optional): 300/1200/2400/4800/9600/19.2k baud; RJ11 6-wire connection; addressable from 0 to 199
Open Collector Outputs: Five 150 mA @ 1 Vdc sink; 30 V open
BCD Output (optional): Isolated; 3- or 6-digit addressing; TTL level output; 5 Vdc external power supply required for isolated output
Mechanical Relays (optional): dual, form C; 7A at 230 Vac/30 Vdc
Analog Outputs (optional): 0 to 5 V/ 1 to 5 V/0 to 10 V/0 to 20 mA/4 to 20 mA all field selectable; all internally powered (sourcing); 600 ohms max. loop impedance for 20 mA outputs; min. 500 ohms input impedance for voltage outputs; 354 Vp isolation; 15-bit resolution; 0.1% of reading accuracy; 50 ms step response; fully adjustable zero and span adjustments.
Dimensions: 48 H x 96 W x 149 mm D (1.89 x 3.78 x 5.86")
Panel Cutout: 45 H x 92 mm W (1.772 x 3.622"); 1?8 DIN
Weight: 574 g (1.27 lb)
注释: DP40-B and DP40-R cannot both be installed in one unit.
产品型号说明：
(1) (2) (3) (4)
选项描述
(1) Model
选择
DPF401 代表 TTL/Open Collector/Contact Closure Input Meter
DPF402 代表 Low Level Pulse Input Meter
DPF403 代表 4-20 mA/0-5 Vdc/1-5 Vdc (field-selectable) Input Meter
DPF400-A3 代表 Analog output board
(2) Power Options
选择
代表 115 Vac leave blank
-230V 代表 230 Vac power
(3) Display Color
选择
代表 red display leave blank
-GR 代表 green display
(4) Output Boards and Communications Options
选择
Nothing(leave field blank) 代表 None
-B 代表 Isolated BCD output board
-R 代表 Dual 7A mechanical relays
注意: 并非所有组合都有效，请参见规格表上有效的产品编号。
产品型号/产品描述
DPF401 TTL/Open Collector/Contact Closure Input Meter Includes 16 V @ 70 mA Output Power
DPF402 Low Level Pulse Input Meter.Includes 12 V @ 70 mA output power or 8.2 V with 1 Kohm source impedance
DPF403 4-20 mA/0-5 Vdc/1-5 Vdc (field-selectable) Input Meter. Includes nominal 24 V @ 25 mA Output Power
DPF400-A3 Analog output board
DP40-B Isolated BCD output board
DP40-R Dual 7A mechanical relays
DP40-S24 Isolated RS232 communications
DP40-9SC2 9-pin Serial Connector for RS-232
DP40-25SC2 25-pin Serial Connector for RS-232
DPF403-AR
DPF403-AR
