TCDK-1A11消防监控模块和电压信号传感器斯沃电工

|TCDK-1A11-内容提要（Synopsis）

******销售   189  、6369、7816****** 

TCDK-1A11消防监控模块和电压信号传感器内置高可靠的24V DC直流电源，为末端传感器供电，有效保证整个系统供电的稳定与，当电压/电流信号传感器检测到电源设备出现断路、短路、过压、欠压、缺相、错相以及过流等故障时，电压/电流信号传感器本地能够报警、并发出信息到消防设备电源状态监控器，消防设备电源状态监控器发出声光报警并记录，从而实现分散监控，集中管理，

|TCDK-1A11细节描述（Detailed deion）
·程序为我公司独立开发，可以根据客户的需求予以定制特殊的功能；
·继电器采用的是国内，使用寿命比常规的要好的多；继电器正常的在六万次以上，其他在七千次左右；
·所有出厂的产品都有刷三防漆，防水、防潮、防腐方面都要好；核心件都是进口件。

·The program is independently developed by our company, and special functions can be customized according to the needs of customers;

·The relay adopts domestic famous brands, and its service life is much better than that of the conventional ones; the normal relay is more than 60000 times, and other brands are about 7000 times;

·All factory products are painted with three proofing paints, which are better in waterproof, moisture-proof and anti-corrosion aspects; the core parts are imported ones.

|TCDK-1A11消防监控模块和电压信号传感器

■ TCDK-1A11监测功能：监测消防电源电压、电流异常状态：主、备电源的过压、欠压、过流、错相、缺相、供电中断等故障状态
■ 统计功能：统计故障信息，形成SOE记录
■ 故障/报警功能：灯光报警
■ 通讯功能：通过智能通讯总线，将信息以数字化的形式进行远程传输，具有高度抗干扰能力
■ 其它功能：自检重要元器件；存储64条报警和故障记录，掉电后可保存10年

■ TCDK-1A11monitoring function: monitoring the abnormal state of fire power supply voltage and current: overvoltage, undervoltage, overcurrent, wrong phase, missing phase, power supply interruption and other fault states of main and standby power supply
■Statistics function: Statistics fault information and form SOE record
■Fault / alarm function: light alarm
■Communication function: remote transmission of information in digital form through intelligent communication bus, with high anti-interference ability
■Other functions: self check important components; store 64 alarm and fault records, which can be sed for 10 years after power failure

|TCDK-1A11产品图片（Product picture）

|TCDK-1A11技术指标（Technical index）
TCDK-1A11供电电压 DC24V由监控器或区域分机集中供电
额定功率 <0.5W
总线通信方式 CAN总线
通信线＋电源线要求 NH-RVS2*1.5mm2(通信线）＋NH-BV2*2.5mm2(电源线）
输出参数 1路无源触点，报警或控制输出
地址编码 每台传感器均具有地址编码
测量范围  AC20～500V DC10～30V AC0～1000A DC0～100A
隔离器         每台传感器内自带隔离器
报警参数 过压>额定电压的110%，欠压<额定电压的85%，电流报警值现场设定
报警显示 LED指示
报警延时 0～60S连续可调，现场可设定
环境温度  －20℃～+70℃
环境湿度 相对湿度≤95%
海拔高度 <4500m
防护等级 IP30
外形尺寸 110mm*85mm*45mm(长*宽*高）
安装方式 标准35mm导轨式安装

The power supply voltage is ﹥ DC24 V, which is supplied by the monitor or regional extension
Rated power < 0.5W
Bus communication mode: can bus
Communication line + power line: nh-rvs2 * 1.5mm2 (communication line) + nh-bv2 * 2.5mm2 (power line)
Output parameter: 1-way passive contact, alarm or control output
Address code each sensor has a unique address code
Measuring range: ac20 ～ 500V, DC10 ～ 30V, ac0 ～ 1000A, dc0 ～ 100A
Isolator each sensor has its own isolator
Alarm parameters: overvoltage > 110% of rated voltage, undervoltage < 85% of rated voltage, current alarm value is set on site
Alarm display LED indication
The alarm delay can be adjusted continuously from 0 to 60s, and can be set on site
Ambient temperature - 20 ℃～ + 70 ℃
Ambient humidity: > relative humidity ≤ 95%
Altitude < 4500m
The protection level is less than IP30
Overall dimension: 110mm * 85mm * 45mm (L * w * h)
Installation method: Standard 35mm rail installation

【内部随机图片】

|TCDK-1A11安装注意事项（Installation precautions）
操作监控器自检机构，观察并记录监控器的工作状态；  接通监控器的主电源，观察并记录监控器的工作状态；  系统中敷设的通信总线应当满足建筑物本身划分的耐火等级线缆；总线敷设应考虑线路的压降损耗，现场测量压降，合理使用中继器扩展，不得随意搭接。

|TCDK-1A11试验设备（Test equipment）
每一个设备出厂前都会经过一整套完整的试验流程以保证它的品质：
--Step 1--静电放电发生器
--Step 2--多功能抗干扰测试
--Step 3--可程式恒温湿试验机
--Step 4--老温老化房
--Step 5--初校验台
--Step 6--复校验台
--Step 7--电能走字台

 Every equipment will go through a complete set of test process before leing the factory to ensure its quality
--Step 1 -- electrostatic discharge generator
--Step 2 -- multi function anti interference test
--Step 3 -- programmable constant temperature and humidity testing machine
--Step 4 -- aging room
--Step 5 -- preliminary calibration platform
--Step 6 -- recheck bench
--Step 7 -- electric energy walking platform

 |TCDK-1A11相关电工知识（Relevant electrical knowledge）

　　1）.功率因素的计算：凡实行功率因素调整电费的用户，应装设无功电度表。按每月实用有功电量和无功电量，计算月平均功率因素。凡实行功率因数调整电费的用户，应装设带有防倒装置的无功电度表。按每月实用有功电量和无功电量，计算月平均功率因数。　　对于很多本*的人来说,对自己所学*的就业方向与就业前景一定很关心。下面，为了满足大家愿望，我根椐自己对本*的了解和参考一些有关资料，对本*就业方向与就业前景做一些大致讲述，以供大家参考。从事电气工程及其自动化*方面的研究、设计、运行、实验、管理及开发等领域工作的高级技术人才。　　②电脑软件，鲁，这是一个系统工具。可以租略的估算电脑的功耗。③使用功率表插座，通过小时/每耗电量计量出功耗（w）。④将家中的电器除电脑外，全部拔的插头不用电，查看你家电表使用1个小时的用电是度。 

|团队实力（Team strength）
我们专注于中低压电气元器件的开发和生产，具备一支10年行业经验的优良产品研发团队。
一、研发团队
公司每年将营业收入的10%投入到研发和技术创新方面，以确保优先一步的技术与产品
二、技术团队
*的维保和售后技术已解决您的后顾之忧
三、销售团队
定期组织员工进行*知识培训以及现场实勘

We focus on the development and production of medium and low voltage electrical components, and he an excellent product R & D team with 10 years of industry experience.
1、 R & D team
Every year, the company invests 10% of its revenue into R & D and technological innovation to ensure the priority of technology and products
2、 Technical team
Professional maintenance and after-sales technology has solved your worries
3、 Sales team
Regularly organize staff to carry out professional knowledge training and field survey

========TCDK-1A11消防监控模块和电压信号传感器斯沃电工南京斯沃为您服务！=========

========TCDK-1A11消防监控模块和电压信号传感器斯沃电工南京斯沃为您服务！=========